Start Abiquo servers and services

To start the Abiquo platform servers and services, do these steps:

  1. On the Abiquo server, restart the HTTP daemon to refresh the user interface files, and bring up the Tomcat server.

    service httpd start service abiquo-tomcat start
  2. On the Remote services server, start the Tomcat server

    service abiquo-tomcat start
  3. On the Monitoring server do these steps.

    1. Edit the file /opt/kairosdb/conf/kairosdb.properties to update the name of the following variable and to remove the port from it:

      1. Replace the line kairosdb.datastore.cassandra.host_list=192.168.888.999:9160.

      2. With this line kairosdb.datastore.cassandra.cql_host_list=192.168.888.999. Please note the new cql_ prefix for host_list.

    2. Edit the file /etc/cassandra/conf/cassandra.yml OR /etc/cassandra/default.conf/cassandra.yaml (whichever exists) to remove a variable:

      1. Remove the line starting with kairosdb.datastore.cassandra.datapoint_ttl and save and close the file.

    3. Edit the file /opt/kairosdb/conf/kairosdb.properties to add a new variable (ref: Internal JIRA SUP-333):

      1. Add kairosdb.datastore.cassandra.datapoint_ttl = 15768000

  4. On the Monitoring server, start the Cassandra service

    sudo service cassandra start
  5. WAIT about 5 minutes until the service is up and running

  6. Start the KairosDB service

  7. Start the other services in this order

  8. On the V2V server: restart the Tomcat server:

     

  9. In Abiquo, re-enable the physical machines!

  10. Clear your browser cache to prevent glitches in the UI

 

Copyright © 2006-2024, Abiquo Holdings SL. All rights reserved