OVA deployment

Monolithic environment:

-Monolithic OVA

-Monitoring OVA (optionally)

Download the monolithic and monitoring Abiquo appliances and follow the steps below:

1. Open the vCenter vSphere web client
2. Go to Host and clusters section in the vSphere web client side panel

3. Go to Actions and select Deploy OVF template

    Click here to expand...

   

4. Select Local file and choose the monolithic OVA downloaded in step 1. Click Next

5. The vSphere client will display the OVA details. Click Next

6. Accept the EULA and click Next
7. Edit the deployed VM name and choose where you want to deploy it. After this, click Next
8. Select which cluster or host will be used for deploy and click Next
9. Choose the datastore for the deployed VM and click Next

10. Select the network destination for the VM management NIC and click Next

11. Enter the template details depending on the OVA you are deploying. For more details, see the parameters table in the documentation for the module. When configured, click Next

     Click here to expand...

    

12. Review the deployment configuration details. If they are OK, you can select the Power on after deployment checkbox. If you need to add extra NICs and HDDs to the VM before deployment, do not select the checkbox. Click Finish

     Click here to expand...

    

    
    

13. Repeat the steps 1-11 for the monitoring OVA file, and fill the form for that OVA. On RabbitMQ IP, set the monolithic IP address:

     Click here to expand...

    

Distributed environment:

-Server

-Remote services

-V2V

-Monitoring

Download the server, remoteservices, v2v and monitoring Abiquo appliances and follow the steps below:

1. Open the vCenter vSphere web client
2. Go to Host and clusters section in the vSphere web client side panel

3. Go to Actions and select Deploy OVF template

    Click here to expand...

   

4. Select Local file and choose the server OVA downloaded in step 1. Click Next

5. The vSphere client will display the OVA details. Click Next

6. Accept the EULA and click Next
7. Edit the deployed VM name and choose where you want to deploy it. After this, click Next
8. Select which cluster or host will be used for deploy and click Next
9. Choose the datastore for the deployed VM and click Next

10. Select the network destination for the VM management NIC and click Next

11. Enter the template details depending on the OVA you are deploying. For more details, see the parameters table in the documentation for the module. When configured, click Next

     Click here to expand...

    

12. Review the deployment configuration details. If they are OK, you can select the Power on after deployment checkbox. If you need to add extra NICs and HDDs to the VM before deployment, do not select the checkbox. Click Finish

     Click here to expand...

    

    
    

13. Repeat the steps 1-12 for the remoteservices, V2V and monitoring OVA files, fill the form for every OVA. On RabbitMQ IP, set the server IP address:

     Click here to expand...