GUI Edit network Public

When you edit a public network, you can change some or all of the following fields, depending on whether you have VMs deployed in the network or not.

Field	Description
Name	The name of the public network
Gateway	IPv4 only. The gateway of the network. The gateway must be an IP address inside the range defined by the network address and mask
Tag	The tag to use for this network. Abiquo recommends that you check the tag for availability. Green: tag available. Yellow: tag in use but can be shared. Red: tag excluded from use in the rack.
Network service type	Select the Network Service Type represents a network interface on the hypervisors. Configure the NIC in the switch and then configure the NSTs for your hosts. You cannot change the NST after users deploy VMs in the network
Device	The device defines the network virtualization system to use for SDN
Restricted	If selected, when users edit VMs, the only users who can work with IPs from this network are users with the privileges to Attach NICs in restricted networks and/or Detach NICs from restricted networks
Static routes	Select Define to edit static routes for the network

You can modify these fields at any time but the changes will only apply to VMs deployed after you make the changes.

Field	Description
Primary DNS	The address of the primary DNS server for your network
Secondary DNS	The address of the secondary DNS server for your network
DNS suffix	The DNS suffix for your network