Enterprise properties general table

vm_variables_csv

aa, bb.*, .*cc.*, .*dd

Pass enterprise properties with keys that match the regular expression value to VMs using cloud-init.

For this example, the platform will create VM variables with any property that is: named "aa"; starts with "bb"; contains "cc"; ends with "dd".

sync.singlevapp

true

If true, in public cloud regions without VDCs, onboard all VMs into a single virtual appliance

sync.singlevapp.name

Single vapp name

The name to use for the single virtual appliance

DR-code

Ent1

The tenant's network name suffix of the external network for DRaaS recovery.
For example, for the vCenter recovery network DraasnetEnt1 where Draasnet is the recovery network base name set with an Abiquo property,
create a DR-code property key with a value of Ent1.

nsxt.infra.dhcp-conf-name

Name of the NSX-T DHCP Profile used to create Tier1 VPCs.
NSXT UI path is:
Policy - Networking - Ip Management - DCHP

nsxt.infra.edge-cluster-name

Name of the NSX-T Edge Cluster used to create Tier1 VPCs.
NSXT UI path is:
Policy - System - Fabric - Nodes - Edge Clusters
Default: Edge-Cluster-01

nsxt.infra.tier0-external-ip

External IP used by the Tier-0.

nsxt.infra.tier0-name

Name of the NSX-T Tier0 used to create the Tier1 VPCs.
NSXT UI path is:
Policy - Networking - Tier-0 Gateway

nsxt.infra.transport-zone-name

Name of the NSX-T Transport Zone (overlay) used to create segments / networks.
NSXT UI path is:
Policy - System - Fabric - Transport Zones