GUI Edit virtual machine General Post-deploy

Field	Description
Name	The friendly name of the VM.
Fully qualified domain name	To change this value in a deployed VM, make the change directly in the operating system
CPU	The number of CPUs. Read-only value with hardware profiles.
Cores per socket	The number of cores per socket. The number of CPUs must be divisible by the number of cores per socket. The maximum value is 32. Not displayed when hardware profiles are used.
RAM	The amount of RAM. Select MB or GB. Read-only value with hardware profiles.
Enable Remote Access	If you disable remote access, the configuration will remain but you cannot access it via the eye icon.
Remote access	If Remote Access is enabled, the Remote Access IP and Port may be displayed.
Remote Access Password	To open the remote access window to your VM from the eye button on the control panel, you must enter this password. By default Abiquo will generate a random password for your VM. To change the password, enter a maximum of 8 characters that are alphanumeric characters only, i.e. [a..z][A..Z][0..9]. If you delete the password, the screen requesting the password will not appear. On ESXi hypervisors, if you set a password and later delete it, the password will be blank, not null. The screen requesting the password will appear, and you should press <Enter> to continue. If the VM is deployed when you change the password, the change will be applied when you save the VM.
Show password	Optionally mark the checkbox to display the remote access password
SSH user / password	The default user and password from the VM template
VM Keymap	ESX/ESXi only - If Remote Access is Available, you can select the keyboard type for remote access through the eye button for ESXi hypervisors
Description	A description of the VM
Hardware profile	If your provider uses hardware profiles, you can change the hardware profile for the VM
Created	Read-only date and time that the VM was created