Deploy distributed scalable monitoring server

Install monitoring appliance

The Monitoring appliance is optional and it contains the Abiquo Watchtower components for VM monitoring and metrics, along with its required services and databases. For a production environment, you can run the monitoring database on the datanode services server. In a distributed scalable environment, you will create a monitoring cluster with one node.

Installation requirements

• 2 CPUs

• 8 GB RAM

• 64 GB HD

Installation parameters

Firewall requirements

Post install steps

Do these steps on the monitoring node.

1. Log in to the monitoring server

2. Edit the Cassandra configuration file at:

   /etc/cassandra/conf/cassandra.yaml

   1. Check the seeds value, which should be the IP of the monitoring VM (or the master VM in the cluster)

      seeds: x.x.x.x

3. Edit the KairosDB properties file at:

   /opt/kairosdb/conf/kairosdb.properties

   1. Remove the this property

   2. Add this property and set the value as the IP address of the monitoring server, without the port. Note the cql_ in the name. For example.

4. Edit the watchtower configuration files at:

   1. Set the URL of the mysql server connection (as on the API server) with the IP address of the watchtower server

   2. Set the database credentials as for the Abiquo server

5. Edit the watchtower properties files at:

   1. Add the port of the RabbitMQ connection to the datanode services server address

6. Check the status of the monitoring services

    

   1. If they are running, stop monitoring services

   2. Check if Cassandra is really dead

      Get the process number for Cassandra (the first number in the output of the previous command), and kill it. In this example, Cassandra is process 12345.

   3. Stop the firewalld (and allow connections as required)

7. Start cassandra and wait 5 minutes before continuing

8. Start kairosdb and wait 1 minute

9. Start abiquo-emmett and abiquo-delorean (the order is not important here)

10. Start firewalld

The monitoring cluster of one server should now be fully functioning.

Enable and validate monitoring

To enable monitoring:

1. On the Abiquo Server and the Abiquo Remote Services servers (but not the V2V server), edit the abiquo.properties file and check or set the following properties:

   1. abiquo.monitoring.enabled = true

   2. abiquo.watchtower.host = {$MONITORING_IP_ADDRESS}

   3. abiquo.watchtower.port = 36638

2. Restart your Abiquo Tomcat services.

To validate monitoring:

1. This step assumes you have followed the https://abiquo.atlassian.net/wiki/spaces/doc/pages/311372993 to deploy a VM in Abiquo

2. Log in to the Abiquo UI and create a new VM and edit it

3. Go to Monitoring and select the Fetch metrics checkbox and the metrics to display

4. Save the VM and deploy it

5. Wait for Abiquo to obtain metrics for the VM (around 5 minutes)

6. On the VM icon, click the graph metrics button to display your VM metrics