Distributed HA cluster environment summary worksheet example
- MS (Unlicensed)
This document is an example of an initial summary worksheet for the distributed HA cluster environment. The examples can give you an idea of a typical configuration and the format of the details that you will enter.
To obtain a blank worksheet, see Distributed HA cluster environment summary worksheet
Important notes
The hostnames must be valid Linux hostnames. The examples have a letter, such as “A”, which could represent a customer name or location, and for remote services a set of letters, such as “DC1”, which you could change for each datacenter.
Abiquo appliances use static network configuration
NTP servers are compulsory and should be functional. Otherwise, clock synchronization dependent features will not work as expected
The server appliance public FQDN must be resolvable on customer premises. A functional DNS entry will be required
The NFS repository folder must be present and fulfill the requirements as stated in the Installation page
Server | Hostname | Management IP address | Notes |
|---|---|---|---|
API |
|
|
|
API-0 | ABQ-API0 | 10.60.30.180 |
|
API-1 | ABQ-API1 | 10.60.30.181 |
|
API-2 | ABQ-AP2 | 10.60.30.182 |
|
Remote Services |
|
|
|
RS-0 | ABQ-A-DC1-RS0 | 10.60.30.183 |
|
V2V-0 | ABQ-A-DC1-V2V0 | 10.60.30.184 |
|
Datanode services |
|
|
|
DN-0 | ABQ-A-DN0 | 10.60.30.185 |
|
DN-1 | ABQ-A-DN1 | 10.60.30.186 |
|
DN-2 | ABQ-A-DN2 | 10.60.30.187 |
|
Monitoring |
|
|
|
MON-0 | ABQ-MON0 | 10.60.30.188 |
|
MON-1 | ABQ-MON1 | 10.60.30.189 |
|
MON-2 | ABQ-MON2 | 10.60.30.190 |
|
Common network properties
Property | Value | Notes |
|---|---|---|
Management IP netmask | 255.255.255.0 |
|
Default gateway | 10.60.30.1 |
|
DNS server list | 10.60.1.4 10.60.2.4 |
|
NTP server list | ntp0.server ntp1.server |
|
Abiquo properties
Property | Value | Notes |
|---|---|---|
API server FQDN | The Abiquo API server FQDN must be resolvable on customer premises. You must create a functional DNS entry for it | |
Abiquo datacenter ID | datacenter1 | This must be the same for the Remote Services and V2V in a datacenter |
NFS template repository | 10.60.2.10:/abiquo-repository | You must create this NFS share following the requirements in the VM repository folder at Installation | VM repository folder. This must be the same for the Remote Services and V2V in a datacenter |
Copyright © 2006-2024, Abiquo Holdings SL. All rights reserved