Distributed environment worksheet example
We are currently updating this worksheet to create a more scalable distributed environment
This is an example for a distributed environment worksheet. Check Distributed environment worksheet to get clean worksheets for your environment. Some notes:
The hostnames must be valid Linux hostnames
Abiquo appliances use static network configuration
NTP servers are compulsory and should be functional. Otherwise, clock synchronization dependent features will not work as expected
The server appliance public FQDN must be resolvable on customer premises. A functional DNS entry will be required
The template repository folder must be present and fulfill the requirements as stated in the Installation page
The rabbitMQ server address in the Remote Server and V2V appliances must be the datanode appliance management IP address. If a datanode is not used, it must the address of the Abiquo Server
Properties in bold characters must match each other
Server
Hostname | abq-server-01 |
Management IP address__________ | 10.60.30.180 |
Management IP netmask | 255.255.255.0 |
Default gateway | 10.60.30.1 |
DNS server list | 10.60.1.4 10.60.2.4 |
NTP server list | ntp0.server ntp1.server |
Abiquo API server FQDN | service.cloud.abiquo.com |
Remote services IP | 10.60.30.181 |
Watchtower IP | 10.60.30.188 |
Datanode
Hostname | abq-dn-01 |
|---|---|
Management IP address__________ | 10.60.30.185 |
Management IP netmask | 255.255.255.0 |
Default gateway | 10.60.30.1 |
DNS server list | 10.60.1.4 10.60.2.4 |
NTP server list | ntp0.server ntp1.server |
Services cluster IPs | 10.60.30.185 |
Remote services
Hostname | abq-rss-01 |
Management IP address__________ | 10.60.30.181 |
Management IP netmask | 255.255.255.0 |
Default gateway | 10.60.30.1 |
DNS server list | 10.60.1.4 10.60.2.4 |
NTP server list | ntp0.server ntp1.server |
API server FQDN | service.cloud.abiquo.com |
Abiquo datacenter ID | datacenter1 |
NFS template repository | 10.60.2.10:/abiquo-repository |
RabbitMQ IP | 10.60.30.185 |
Watchtower IP | 10.60.30.188 |
V2V
Hostname | abq-v2v-01 |
Management IP address__________ | 10.60.30.182 |
Management IP netmask | 255.255.255.0 |
Default gateway | 10.60.30.1 |
DNS server list | 10.60.1.4 10.60.2.4 |
NTP server list | ntp0.server ntp1.server |
Abiquo datacenter ID | datacenter1 |
NFS template repository | 10.60.2.10:/abiquo-repository |
Server appliance RabbitMQ location OR | 10.60.30.185 |
Datanode
Hostname | abq-dtn-01 |
|---|---|
Management IP address__________ | 10.60.30.185 |
Management IP netmask | 255.255.255.0 |
Default gateway | 10.60.30.1 |
DNS server list | 10.60.1.4 10.60.2.4 |
NTP server list | ntp0.server ntp1.server |
Services cluster IPs | 10.60.30.185 |
Monitoring
If you are deploying the optional monitoring appliance, you will also need the parameters below for the monitoring appliance installation.
Hostname | abq-mon-01- |
Management IP address | 10.60.30.188 |
Management IP netmask | 255.255.255.0 |
Default gateway | 10.60.30.1 |
DNS server list | 10.60.1.4 10.60.2.4 |
NTP server list | ntp0.server ntp1.server |
Server appliance RabbitMQ location OR | 10.60.30.185 |
Copyright © 2006-2024, Abiquo Holdings SL. All rights reserved