NSX properties

abiquo.nsx.connection-timeout-ms

Timeout to establish connections to the NSX manager in milliseconds. A value of 0 means no timeout.
Default: 0

RS

abiquo.nsx.edge.cluster-id

vCenter cluster where the Edge appliances will be deployed.

RS

abiquo.nsx.edge.datastore-id

vCenter datastores where the Edge appliances will be deployed. List of datastore identifiers in CSV format.

RS

abiquo.nsx.edge.datastore-policy

Allocation policy for selection of datastores from list to deploy Edge appliances
Valid values: leastvms, mostspace
Default: leastvms

RS

abiquo.nsx.edge.description

Edge description
Default: Managed by Abiquo

RS

abiquo.nsx.edge.dhcp.size

Specify the size of the DHCP edge appliance (ecmp plugin)
Valid values: compact, large, quadlarge, xlarge
Default: compact

RS

abiquo.nsx.edge.dvportgroup-id

vCenter distributed port where the uplink interfaces of the Edges will be attached.

RS

abiquo.nsx.edge.esg.size

Specify the size of the ESG edge appliance (gateway and ecmp plugin)
Valid values: compact, large, quadlarge, xlarge
Default: compact

RS

abiquo.nsx.edge.plr-esg-id

ID of the Edge that acts as the PLR (nat plugin)

RS

abiquo.nsx.edge.plr-transit-cidr

CIDR of the transit network network to be used between the PLR and the Edges of each Abiquo VDC (nat plugin)

RS

abiquo.nsx.edge.plr-transit-ip

IP address from the PLR transit network to be assigned to the PLR. If not set, use the first IP address in the transit network (nat plugin).

RS

abiquo.nsx.edge.public-network-cidr

Configure primary addresses of Edge uplink interfaces from this pool.

RS

abiquo.nsx.firewall.applicationprotocols

Firewall protocols that are allowed to use services applications, aka ALG (Application Level Gateway). Collections separated by a hash ''#'' delimiter.
Default: FTP#SMB#ORACLE_TNS#MS_RPC_TCP#SUN_RPC_TCP

RS

abiquo.nsx.load-balancer-acceleration

Enable load balancer acceleration in NSX load balancers.
Default: false

RS

abiquo.nsx.load-balancer-reserved-ips

Number of IP addresses that are reserved for NSX in each private network to allocate to load balancers.
Default: 20

RS

abiquo.nsx.nat.protocols

Allowed NAT rule protocols (nat plugin). Collections separated by a hash ''#'' delimiter.
Default: TCP,UDP,ANY,ICMP#ANY,ICMP#Parameter-Problem,ICMP#Echo-Request,ICMP#Destination-Unreachable,ICMP#Redirect,ICMP#Router-Solicitation,ICMP#Time-Exceeded,ICMP#Address-Mask-Request,ICMP#Timestamp-Reply,ICMP#Router-Advertisement,ICMP#Timestamp-Request,ICMP#Address-Mask-Reply,ICMP#Echo-Reply,ICMP#Source-Quench

RS

abiquo.nsx.read-timeout-ms

Timeout to complete connections to the NSX manager in milliseconds. A value of 0 means no timeout.
Default: 0

RS

abiquo.nsx.static-edge-gateway

If false, when modifying the gateway of a network only update the Edge interface address if the new gateway is not used in any of the DHCP leases.
Default: true

RS

abiquo.nsx.transport-zone

The transport zone that logical switches will be connected to.

RS

abiquo.nsx.use-edge-dhcp

Configure DHCP in Edge only for selected network types. The default is all network types (comma separated values).
Default: internal, external, public, unmanaged

RS

abiquo.nsx.virtualwire.teaming

Set a teaming policy for the portGroup that is the backing for the VirtualWire when it is created. This value cannot be changed after it is created.
Valid values: failover_explicit, loadbalance_ip, loadbalance_loadbased, loadbalance_srcid, loadbalance_srcmac
Default: failover_explicit

API

abiquo.nars.async.pool.{plugin}.byvdc

• nsx-ecmp

• nsx-gateway

• nsx-nat

If true, the maximum number of simultaneous operations apply on a single virtualdatacenter (instead of single hypervisor or region connection), by type. The default value is the value of abiquo.nars.async.pool.byvdc
Default: false

RS

abiquo.nars.async.pool.{plugin}.max

• nsx-ecmp

• nsx-gateway

• nsx-nat

Maximum number of simultaneous operations on a single hypervisor or region connection, by type. The default is the value of abiquo.nars.async.pool.max
Default: 2

• zerto = 1

RS

abiquo.virtualfactory.{plugin}.device.openSession

• nsx-ecmp

• nsx-gateway

• nsx-nat

Maximum number of simultaneous operations on a single device, by type. The default value is the value of abiquo.virtualfactory.device.openSession
Default: 2

RS

abiquo.virtualfactory.{plugin}.device.openSession.byvdc

• nsx-ecmp

• nsx-gateway

• nsx-nat

If true, the maximum number of simultaneous operations apply to a single virtualdatacenter (instead of single device), by type. The default value is the value of abiquo.virtualfactory.device.openSession.byvdc
Default: false

RS