This document describes load balancers in NSX-T.
| NSX-T Element | Notes |
|---|---|
| NSX-T documentation | |
| Load balance multiple protocols and ports | Use multiple load balancers to the same IP address each with an incoming connection to a different port |
| Algorithms |
|
| Addresses | In NSX-T a load balancer must have at least one private address |
| Routing rule protocols in | NSX-T accepts HTTP, HTTPS, TCP and UDP. |
| Changes to routing rules | You can change NSX-T routing rules after they have been created |
| Health check | The health check is not required |
| Health check protocols | NSX-T supports: HTTP, HTTPS, TCP, UDP, ICMP |