This is an example for a trial deployment worksheets. Check Monolithic environment worksheet to get clean worksheets for your environment. Some notes:
- The hostnames must be Linux valid hostnames
- Abiquo appliances use static network configuration
- NTP servers are compulsory and should be functional. Otherwise, any clock synchronization dependent feature will not work as expected
- The monolithic appliance public FQDN must be resolvable on customer premises. A functional DNS entry will be required
- The template repository folder must be present and fulfill the requirements as stated in the Trial Deployment page
- The rabbitMQ server address in the monitoring appliance must be the monolithic appliance management IP address
Monolithic
You will need the following parameters during the monolithic appliance installation. The bootstrap process will configure the appliance accordingly to your environment requirements:
Hostname | abq400_________________________________________ |
Management IP address__________ | 10.60.30.180 |
Management IP netmask | 255.255.255.0 |
| Default gateway | 10.60.30.1 |
| DNS server list | 10.60.1.4 8.8.8.8 |
| NTP server list | 10.60.1.4 8.8.8.8 |
| Appliance public FQDN | abq400.agc.abiquo.com |
| Abiquo Datacenter ID | datacenter1 |
Template repository folder | 10.60.1.104:/volume1/nfs-devel |
Monitoring
If you are deploying the optional monitoring appliance, you will need the parameters below too for the monitoring appliance installation:
Hostname | wt400____________________________________ |
Management IP address__________ | 10.60.30.183 |
Management IP netmask | 255.255.255.0 |
| Default gateway | 10.60.30.1 |
| DNS server list | 10.60.1.4 8.8.8.8 |
| NTP server list | 10.60.1.4 8.8.8.8 |
RabbitMQ server address | 10.60.30.180 |