Abiquo 5.1 enables the user to set a bandwidth limit in a virtual datacenter for each Public IP using Quality of Service (QoS traffic shaping) parameters. This feature applies to public IPs in infrastructure and managed by NSX in vCenter and vCenter clusters. It requires a new privilege to Manage bandwidth limit for public IPs. During an upgrade or when you create a virtual datacenter, the public IP bandwidth limit is disabled. To use QoS, edit the limit to set a value. The platform will apply the value when you deploy or reconfigure a VM to use a public IP.
To edit the bandwidth limit:
- Select the virtual datacenter and go to Network → QoS
- Click the pencil edit button
- To enable the bandwidth limit in a specific direction, select the Enabled checkbox for that direction
- Set QoS values for each public IP in your virtual datacenter.
Unable to render {include} The included page could not be found.
To register changes that were made outside the platform, save existing NAT bandwidth values. In the API, to register changes, send a POST request with the existing values.