Changes to Abiquo Configuration Properties

abiquo.esxi.datastoreVmFile

The datastore to hold the VM definition file when deploying VMs with only volumes attached. If there are standard disks, use the datastore of one of these disks, otherwise use the property. The default value is defined by 'abiquo.esxi.datastoreRdm'.

Enable/disable monitoring, alarms and alerts
Default: false

abiquo.neutron.external-net

Name of the gateway network in Neutron where routers will be connected. This network is the one that connects the Neutron internal networks to the world.
Default: abq-external

abiquo.neutron.region

The region that configures the Neutron endpoint in the Keystone installation. By default Abiquo will use the value of the 'abiquo.datacenter.id' property.

abiquo.neutron.reserved-ips

Number of IP addresses that are reserved for Neutron in each network. For each network, Neutron needs at least: one address for the DHCP agent, one for the network gateway, one for the network router, and one for each load balancer. This has to be taken into account when planning the number of IPs reserved for Neutron, as it will determine the total number of load balancers that users will be able to create in each network.
Default: 20

abiquo.neutron.vlan-physical-net

Name of the physical network in Neutron where the VLANs created from Abiquo will be attached.
Default: abq-vlans

Milliseconds to wait before retrying a virtual appliance spec materialization in the same virtual datacenter.
Default: 15000

Number of concurrent virtual appliance spec materialization operations at a given time (not in the same virtual datacenter).
Default: 3

abiquo.watchtower.host

Address where watchtower is located for monitoring use
Default: 127.0.0.1

abiquo.watchtower.port

Port where watchtower is listening for monitoring use
Default: 36638

abiquo.rabbitmq.username

RabbitMQ username
Default: abiquo

abiquo.rabbitmq.password

RabbitMQ password
Default: abiquo

Disk format type for instances taken in virtual datacenters for each hypervisor plugin (HV). Set to empty with no value to avoid any additional conversion (use the instance operation result format).

There is no default value for Hyper-V so that the result format will be the same as the original template (VHD or VHDX)

abiquo.nsx.edge.cluster-id

vCenter cluster where the Edge appliances will be deployed.

abiquo.nsx.edge.datastore-id

vCenter datastore where the Edge appliances will be deployed.

abiquo.nsx.edge.dvportgroup-id

vCenter distributed port where the uplink interfaces of the Edges will be attached.

abiquo.nsx.edge.public-network-cidr

Configure primary addresses of Edge uplink interfaces from this pool.

abiquo.nsx.load-balancer-reserved-ips

Number of IP addresses that are reserved for NSX in each private network to allocate to load balancers.
Default: 20

abiquo.nsx.transport-zone

The transport zone that logical switches will be connected to.

• cpu
• cpu-mz
• cpu-time
• memory
• memory-swap
• memory-swap2
• memory-vmmemctl
• memory-physical
• memory-host
• disk-latency
• uptime

To prevent Abiquo from retrieving metrics, set the property to false for each ESXi metric (METRIC) you do not wish to retrieve. After you change these properties, restart the Monitor Manager (VSM) remote service for the properties to take effect.
Default: true
Range: true,false

In version 3.8 and 3.8.1, the name of these properties was "esx" instead of "esxi"

abiquo.nsx.connection-timeout-ms

Timeout to establish connections to the NSX manager in milliseconds. A value of 0 means no timeout.
Default: 0

abiquo.nsx.read-timeout-ms

Timeout to complete connections to the NSX manager in milliseconds. A value of 0 means no timeout.
Default: 0

abiquo.nsx.use-edge-dhcp

Configure DHCP in Edge only for selected network types. The default is all network types (comma separated values).
Default: internal, external, public, unmanaged

abiquo.dvs.enabled

Enable DVS. Note that the vCenter login and password can be used when DVS is disabled
Default: true

abiquo.storage.forcesamecontrollertype

abiquo.auth.module

Whether Abiquo will authenticate against: database, database and LDAP/Active Directory, or OpenID
Default: abiquo
Range: abiquo, ldap, openid
Added openid type

The OpenID Connect authorization endpoint. This endpoint must be accessible from the user's browser

abiquo.openid.client.id

The ID of the client that has been registered in the OpenID Connect server for the Abiquo platform.

abiquo.openid.client.name

The name of the client that has been registered in the OpenID Connect server for the Abiquo platform.

abiquo.openid.client.redirect-uris

Comma separated list of allowed redirect (callback) URIs used during the authentication flow. Must be: http://<api endpoint>/api/openid_connect_login

abiquo.openid.client.scopes

Comma separated list of scopes to request during authentication. Must have, at least: openid,profile,email.

abiquo.openid.client.secret

The secret of the client that has been registered in the OpenID Connect server for the Abiquo platform.

abiquo.openid.endsession.endpoint

(Optional) If configured, Abiquo will attempt to perform a global logout by performing a request to this endpoint. This is part of the Session Management optional spec. This endpoint must be accessible from the user's browser

abiquo.openid.enterprise-claim

The name of the claim returned by the authorization server that contains the names used to map the Abiquo enterprise where the user belongs.

abiquo.openid.enterprise-property

(Optional) If present, Abiquo will try to find an enterprise that has a property with the name configured in this Abiquo property, and use its value to match the "enterprise claim" when resolving the user's enterprise. If absent, Abiquo will just look for an enterprise with the name returned in the "enterprise claim".

abiquo.openid.issuer

The OpenID Connect authorization issuer.

abiquo.openid.role-claim

The name of the claim returned by the authorization server that contains the names used to map the user permissions to an Abiquo role.

abiquo.openid.target

The URL where the user will be redirected from the OpenID connect server upon successful authentication. Something like http://<abiquo ui host>/ui/#/dashboard

abiquo.openid.jwks.endpoint

The OpenID Connect JWKS endpoint. This endpoint must be accessible from the Abiquo server

abiquo.openid.token.endpoint

The OpenID Connect token endpoint. This endpoint must be accessible from the Abiquo server

abiquo.openid.userinfo.endpoint

The OpenID Connect user info endpoint. This endpoint must be accessible from the Abiquo server

The delay between VSM polling of virtual machines in milliseconds for each public cloud plugin (PC).
Default: 300000

Delay between executions of the public cloud provider templates check (milliseconds). Default is 12 hours
Default: 43200000

The delay between VSM polling of virtual machines in milliseconds for each public cloud plugin (PC).

abiquo.openstack.autoAllocateFloatingIps

If true, enable automatic Floating IP allocation. This property configures how public IP addresses are assigned to the virtual machines deployed in OpenStack clouds. If the virtual machines are not directly attached to a public network, enabling this property will automatically allocate a floating IP for the virtual machines. If virtual machines are deployed and attached directly to a public network, then this property should be set to false.

abiquo.openstack.autoGenerateKeyPairs

If true, enable automatic generation of key pairs. This will make sure that the owner of the virtual machines will have SSH access to the deployed virtual machines.

abiquo.server.sessionTimeout

Time the server waits before marking a client session as expired (minutes).

Override default plugin metadata to update the preferred format when requesting compatible conversions. This format should be included in the 'compatibleDiskFormatTypes' list. Allowed values: any DiskFormatType; For more information and default values. See Template Compatibility Table.
Default: VMDK_FLAT

abiquo.pluginmetadata.{HV}.compatibleDiskFormatTypes

• vmx_04
• kvm
• hyperv_301
• oracle_vm
• xenserver

Override default plugin metadata to update the list of compatible formats. Allowed values: any DiskFormatType. List of comma separated values, should contain 'baseDiskFormatType'. See Template Compatibility Table.
Default: VMDK_FLAT,VMDK_SPARSE 

abiquo.pluginmetadata.{HV}.diskControllers

• vmx_04
• kvm
• hyperv_301
• oracle_vm
• xenserver

Override default plugin metadata to update the compatible controller. Allowed values: any DiskControllerType. List of comma separated values; first is used as default. Possible values are SCSI, IDE, VIRTIO
Default: SCSI,IDE 

com.abiquo.esxi.disk.enableuuid

Present Disk UUID as SCSI serial number in the guest OS
Default: true

Polling interval for checking if guest tools is up and running after power on. The default value is 10 seconds
Default: 10000

Time to wait for guest tools to get up and running after power on. The default value is 15 minutes
Default: 90000

Optional path to custom unattend file on the Remote Services server. Abiquo will replace the variables $adminPassword and $hostName
Default: /opt/abiquo/config/my_unattend.xml

Character set to be used in email notifications
Default: UTF-8

com.abiquo.esxi.experimental.customize.waitpassword.periodms

Prevent the user from logging in before the guest customizations have applied the password. Wait in milliseconds between checks for the password set by guest customizations
Default: 10000

Timeout in milliseconds for checks for the password set by guest customizations. The default value of 0 means that the timeout is not activated. To activate it set a value, such as 9000000 ms (15 minutes)

Whether the platform should avoid swap or not.
Default: false

Set virtual machine memory reservation.
Default: 0

abiquo.openid.client.scopes

Comma separated list of scopes to request during authentication. Must have, at least: openid,profile,email. Abiquo 3.10.7 added support for phone

abiquo.amazon.public.subnet.mask

Mask to use when creating the public subnet in AWS to configure the nating
Default: 24

abiquo.backup.{BACKUP-PLUGIN}.config.path

• • avamar
  • veeam

This property indicates where the backup plugin configuration file is located for each backup plugin (BACKUP-PLUGIN}. This property is only required in the remote services that use the plugin: virtual-factory, cloud-provider-proxy
Default:

• • avamar = /opt/abiquo/config/avamar.properties
  • veeam = /opt/abiquo/config/veeam.properties

Number of IP addresses that are reserved for vCloudDirector in each private network to allocate to load balancers.
Default: 20

abiquo.virtualfactory.backup.openSession

Maximum number of simultaneous operations on a single backup manager
Default: 2

abiquo.virtualfactory.device.openSession

Maximum number of simultaneous operations on a single device
Default: 2

abiquo.vsm.vmsyncfrequency.vcd

The delay between virtual machine synchronizer operations in milliseconds. for each hypervisor or public cloud plugin (PLUGIN)
Default: 180000

Port for connection to vCenter (only used in NSX)
Default: 443

Used to whitelist groups of hardware profiles, for example, abiquo.amazon.defaultprofiles=t1.micro,c4.small

Abiquo v4.0+ manages hardware profiles on the Hardware profiles tab in Infrastructure view, so Abiquo v4.0+ will ignore these properties.

During the upgrade process to v4.0, Abiquo will retrieve the previously whitelisted profiles for the cloud provider from the Abiquo database and create them in Abiquo, and make them available to all enterprises with credentials for a public cloud provider.

When the Administrator synchronizes hardware profiles in Infrastructure view, ALL hardware profiles will be obtained from the cloud provider and created as active profiles in Abiquo. The administrator can then control the profiles available to each enterprise and recommended profiles for each virtual machine template

Note: This property was previously documented in the Abiquo 3.10 wiki in Control hardware profiles in public cloud.

abiquo.virtualfactory.azurecompute-arm.maxconcurrentupdates

The maximum number of concurrent updates to a virtual machine in Azure ARM.
Default: 5

abiquo.dvs.portgroup.maxsize

Number of available ports in each port group.

abiquo.dvs.vcenter.password

Password of the vCenter account

abiquo.dvs.vcenter.user

User of the vCenter user account

Delay between executions of the backup results check (milliseconds). Default is 10 minutes
Default: 600000
Default changed form 43,200,000 ms

Disk format type for instances taken in virtual datacenters for each hypervisor plugin (HV). Set to empty with no value to avoid any additional conversion (use the instance operation result format).
Defaults: esx = vmdk_sparse

abiquo.m.instanceid

Unique name for an M instance. All M instances must set this property to a unique name. The name must be unique even between the members of the same cluster of M nodes.

For your RabbitMQ server(s), an obligatory list of host:port values, separated by commas. Replaces the separate address and port properties that are now deprecated
Default: localhost:5672

For each SMTP property available in Java Mail (see the full reference here:
https://javaee.github.io/javamail/docs/api/com/sun/mail/smtp/package-summary.html) you can define an Abiquo propery to configure it by adding the 'abiquo.server.mail.extra.' prefix. For example, you could configure the 'mail.smtp.quitwait' by setting the following property: abiquo.server.mail.extra.mail.smtp.quitwait = false

abiquo.virtualfactory.azurecompute-arm.maxconcurrentupdates

The maximum number of concurrent updates to a virtual machine in Azure ARM.
Default: 5

abiquo.vsm.actor.creation.delay.esx

The delay in milliseconds added between the creation of actors on VSM startup for each hypervisor or public cloud plugin (PLUGIN).
Default: 0

abiquo.vsm.hostsyncfrequency.{HV}

• • vmx_04
  • esx
  • kvm
  • hyperv_301
  • oracle_vm
  • xenserver
  • vcd

Time between executions of infrastructure check in milliseconds
Default: 300000

abiquo.vsm.pollingfrequency.packet

The delay between VSM polling of virtual machines in milliseconds for each public cloud plugin (PC).
Default: 300000

abiquo.vsm.pollingfrequency.esx

The delay between VSM polling of virtual machines in milliseconds for each hypervisor (HV).
Default: 300000

abiquo.vsm.vmsyncfrequency.esx

The delay between virtual machine synchronizer operations in milliseconds. for each hypervisor or public cloud plugin (PLUGIN)
Default: 180000

abiquo.auth.module

Whether Abiquo will authenticate via: database; database and LDAP/Active Directory; or OpenID.
Default: abiquo
Range: abiquo, ldap, openid
Added openid

abiquo.rabbitmq.host

Address where RabbitMQ is located

abiquo.rabbitmq.port

RabbitMQ password

Update DHCP during virtual machine capture
Default: false

Maximium period in days for statistical metrics queries through the API
Default: 7

abiquo.nsx.edge.datastore-policy

Allocation policy for selection of datastores to deploy Edge appliances.
Default: leastvms
Range: leastvms, mostspace

abiquo.rabbitmq.tls

Set to true if RabbitMQ server is SSL enabled
Default: false

abiquo.rabbitmq.tls.trustallcertificates

The platform will not enforce any server certificate authentication if set to true
Default: false

Interval between executions of the virtual machine standardized stats updater in milliseconds
Default: 43200000

Number of days to consider in the statistic query executed by the virtual machine standardized stats updater
Default: 30

abiquo.watchtower.password

Watchtower password
Default: xabiquo

abiquo.watchtower.tls

Set to true if Watchtower server is SSL enabled
Default: false

abiquo.watchtower.tls.trustallcertificates

The platform will not enforce any server certificate authentication if true
Default: false

abiquo.watchtower.username

Watchtower username
Default: admin

Delay between executions of the backup results check (milliseconds). Default is 10 minutes
Default: 600000
Change to default value

abiquo.nsx.edge.datastore-id

List of vCenter datastores where the Edge appliances will be deployed in CSV format with allocation according to abiquo.nsx.edge.datastore-policy
Changed to CSV list

If true, force eager zero thick provisioning on copied disks. Deprecated and replaced by Allocation attribute for VM templates and VM disks

abiquo.esxi.datastoreVmFile

The datastore to hold the VM definition file when deploying VMs with only volumes attached. If there are standard disks, use the datastore of one of these disks, otherwise use the property. The default value is defined by 'abiquo.esxi.datastoreRdm'.

abiquo.cpp.cloudoorsphere.defaults.healthcheck.attempts

The load balancer health check attempts to return while syncing a load balancer
Default: 3

abiquo.cpp.cloudoorsphere.defaults.healthcheck.bodyregex

The load balancer health check body regex to return while syncing a load balancer

abiquo.cpp.cloudoorsphere.defaults.healthcheck.interval

The load balancer health check interval to return while syncing a load balancer
Default: 60000

abiquo.cpp.cloudoorsphere.defaults.healthcheck.path

The load balancer health check path to return while syncing a load balancer
Default: /

abiquo.cpp.cloudoorsphere.defaults.healthcheck.port

The load balancer health check port to return while syncing a load balancer
Default: 80

abiquo.cpp.cloudoorsphere.defaults.healthcheck.protocol

The load balancer health check protocol to return while syncing a load balancer
Default: http

abiquo.cpp.cloudoorsphere.defaults.healthcheck.statusregex

The load balancer health check status regex to return while syncing a load balancer
Default: 200

abiquo.cpp.cloudoorsphere.defaults.healthcheck.timeout

The load balancer health check timeout to return while syncing a load balancer
Default: 20000

abiquo.cpp.cloudoorsphere.defaults.loadbalancer.algorithm

The load balancer algorithm to return while syncing a load balancer
Default: round-robin

abiquo.cpp.cloudoorsphere.defaults.loadbalancer.instancetype

The instance type (hardware profile) to use when creating a load balancer
Default: t2.nano

abiquo.cpp.cloudoorsphere.loadbalancer.allowed.algorithms

The list of algorithms supported by the load balancers (comma-separated values)
Default: round-robin

abiquo.cpp.cloudoorsphere.loadbalancer.creation.timeout

Timeout to use while creating a load balancer and waiting for a finished status
Default: 600000

abiquo.cpp.cloudoorsphere.loadbalancer.deletion.timeout

Timeout to use while deleting a load balancer and waiting for a finished status because the API does not return this status
Default: 600000

Edge description.
Default: Managed by Abiquo

Specify the size of the DHCP Edge appliance (ecmp plugin).
Default: compact
Range: compact, large, quadlarge, xlarge

Specify the size of the ESG Edge appliance (gateway and ecmp plugin).
Default: compact
Range: compact, large, quadlarge, xlarge

ID of the Edge that acts as the PLR (nsx-nat only)

CIDR of the transit network to be used between the PLR and the Edges of each Abiquo VDC (nsx-nat only)

Configure the IP to be used to connect the PLR to the plr-transit vSwitch (nsx-nat only). Optional, if not set, use the lowest address in "abiquo.nsx.edge.plr-transit-cidr"

abiquo.virtualfactory.cloudoorsphere.vmstate.retry.timeoutInMilliseconds

The timeout to get the state of a VM after a power action
Default: 1800000

Time to wait to establish the connection to vCloud Director (milliseconds)
Default: 10000

Maximum time to wait for login to vCloud Director (milliseconds)
Default: 60000

Maximum time to wait to read from the connection to vCloud Director (milliseconds)
Default: 30000

abiquo.nsx.nat.protocols

abiquo.nsx.edge.public-network-cidr

Template to configure guest initial passwords that enables you to define the length and the character set. The following tokens are allowed in the template:

• lower= –configures the number of lower case characters to generate
• upper= –configures the number of upper case characters to generate
• numbers= –configures the number of numbers to generate
• symbols= –configures the number of special characters to generate.
• global= –configures the number of total characters to generate.

For each token, the value must be in one of the following formats:

• N –generate this exact number of characters
• N-M –generate between N and M characters
• N- –generate at least N characters.
• -M –generate at most M characters

Examples:

1. Password with at least 2 lower case and upper case letters, between 2 and 4 special characters, and a total length of 10 characters: 
   abiquo.guest.password.length = lower=2-,upper=2-,numbers=0,symbols=2-4,global=10
2. Password with at least 5 characters, regardless of the content: abiquo.guest.password.length = global=5-

Default: lower=2-6,upper=2-6,numbers=2-6,symbols=2-6

Characters to avoid when generating guest passwords, for example: ,;$

Do not try to retrieve historical metrics data for vCloud Director, only use live metrics
Default: false

If it is not possible to retrieve historical metrics data for vCloud Director, attempt to use live metrics
Default: true

Private network connection to allow outgoing traffic in vCloud Director. Value can be "none" for isolated networks or any existing organization network name. The default value of "edge-uplink" will use the external network connected to the edge gateway of the organization virtual datacenter.
Default: edge-uplink

abiquo.virtualfactory.hyperv.automaticShutdownAction

Action to take for the VM when the host is shut down. Sets Msvm_VirtualSystemSettingData.AutomaticShutdownActionhttps://msdn.microsoft.com/en-us/Library/hh850257(v=vs.85).aspxwhen creating a VM. When it is set to "3", the state will be saved and swap files will be written; set their location with the swapFileDataRoot property.
Default: 3
Range: 2, 3, 4

abiquo.virtualfactory.hyperv.refreshMonitorJob.intervalms

Refresh interval in milliseconds for checking progress on operations that require monitoring of a job, such as disk copies.
Default: 1000

abiquo.virtualfactory.hyperv.sambaHosts

List of Samba hosts where the platform can discover shares to use as Hyper-V datastores. The list is in CSV format. Leave empty to not try discovery

abiquo.virtualfactory.hyperv.swapFileDataRoot

The path of a directory where swap files for the VM will be stored. When the automaticShutdownAction property is set to save the VM state, swap files will be written to this location.
Default: C:\ProgramData\Microsoft\Windows\Hyper-V

Default password for virtual machines in Azure if not found in the template
Default: abqazure0!5

Default login for virtual machines in Azure if not found in the template.
Default: abiquo

abiquo.virtualfactory.azure.retry.timeBetweenTriesInSeconds

Time to wait between polls during a retry
Default: 30

abiquo.virtualfactory.azure.retry.timeoutInSeconds

Timeout retrying an operation
Default: 900

abiquo.virtualfactory.azure.storageAccountPrefix

Prefix of the name of the Azure Storage account created for deployments (one account per region).
Default: abiquostorage

abiquo.virtualfactory.azure.wait.timeBetweenTriesInSeconds

Time to wait between polls during an operation wait.
Default: 30

abiquo.virtualfactory.azure.wait.timeoutInSeconds

Timeout waiting for an operation to complete, e.g deploy / undeploy.
Default: 900

The delay in milliseconds added between the creation of actors on VSM startup for each hypervisor or public cloud plugin (PLUGIN).
Default: 0
Deleted azure

abiquo.vsm.hostsyncfrequency.{HV}

• • vmx_04
  • esx
  • kvm
  • hyperv_301
  • oracle_vm
  • xenserver
  • vcd
    
  • oracle-ase-emea
  • orace-ase-us

Time between executions of infrastructure check in milliseconds
Default: 300000
Added oracle-ase-emea and oracle-ase-us

abiquo.vsm.pollingfrequency.{PC}

• • amazon
  • azurecompute-arm
  • digitalocean2
  • elastichosts-ams-e
  • elastichosts-hkg-e
  • elastichosts-lax-p
  • elastichosts-lon-b
  • elastichosts-lon-p
  • elastichosts-sat-p
  • elastichosts-sjc-c
  • cloudsigma2-lvs
  • cloudsigma2-zrh
  • cloudsigma2-hnl
  • cloudsigma2-sjc
  • cloudsigma2-wdc
  • google-compute-engine
  • openstack-nova
  • oracle-ase-emea
  • oracle-ase-us
  • packet
  • rackspace-cloudservers-us
  • rackspace-cloudservers-uk
  • softlayer

The delay between VSM polling of virtual machines in milliseconds for each public cloud plugin (PC).
Default: 300000
Delete azure and added oracle-ase-emea and oracle-ase-us

abiquo.vsm.vmsyncfrequency.{PLUGIN}

• • vmx_04
  • esx
  • kvm
  • hyperv_301
  • oracle_vm
  • xenserver
  • amazon
  • vcd
  • oracle-ase-emea
  • oracle-ase-us
  • azurecompute-arm

The delay between virtual machine synchronizer operations in milliseconds. for each hypervisor or public cloud plugin (PLUGIN)
Default: 180000
Deleted azure and added oracle-ase-emea, oracle-ase-us, and azurecompute-arm

Validate acr values from jwt token when authenticating with an OpenID Connect Server, if true
Default: true

Space separated values to send as acr values to an OpenID Connect Server when authenticating and to validate from jwt token if 'acr-validation' property is true
Default: 

After OpenID authentication flow, the API redirect adds a cookie with the access_token and the id_token. The expiry of the OpenID authentication cookie in seconds. A negative value means that the cookie is not stored persistently and will be deleted when the web browser exits. A zero value causes the cookie to be deleted
Default: 30

Override default plugin metadata to update the compatible ethernet driver
Default: E1000, VMXNET3, PCNET32, VIRTIO

The sender of platform email notifications
Default: abiquo.server.mail.user

The default login name if not specified by the imported ARM template or by editing the template in the platform
Default: abiquo

The default login password if not specified by editing the template in the platform
Default: Password123456!

The maximum number of simultaneous operations on a single hypervisor or provider region.
Default: abiquo.virtualfactory.openSession

The maximum number of simultaneous operations on a single device
Default: abiquo.virtualfactory.device.openSession

The maximum number of simultaneous operations on a single backup manager, by type
Default: abiquo.virtualfactory.backup.openSession

If true, the maximum number of simultaneous operations applies to a single virtual datacenter (instead of single hypervisor)
Default: false

If true, the max number of simultaneous operations applies to a single virtualdatacenter (instead of single hypervisor), by type.
Default: abiquo.virtualfactory.openSession.byvdc

If true, the default maximum number of simultaneous operations applies to a single virtualdatacenter (instead of a single device)
Default: false

If true, the default maximum number of simultaneous operations applies to a single virtualdatacenter (instead of a single device), by type
Default: abiquo.virtualfactory.device.openSession.byvdc

If true, the default maximum number of simultaneous operations applies to a single virtualdatacenter (instead of a single backup manager)
Default: false

If true, the default maximum number of simultaneous operations applies to a single virtualdatacenter (instead of a single backup manager), by type
Default: abiquo.virtualfactory.backup.openSession.byvdc

Maximum hours without activity in a pool before release. The minimum value is 6 and if a lower value is specified, the platform will use 6
Default: 24

If true, VM state changes (powerOn, powerOff, shutdown, reset, pause, resume) are executed outside the pool (not waiting for any operation)
Default: false

abiquo.virtualfactory.{HP}.openSession.faststatechanges

• oracle_vm
• amazon
• kvm
• vmx_04
• rackspace-cloudservers-uk
• softlayer
• esx
• vcenter_cluster
• openstack-nova
• packet
• hyperv_301
• oracle-ase-emea
• azurecompute-arm
• oracle-ase-us
• vcd
• xenserver
• digitalocean2
• google-compute-engine
• rackspace-cloudservers-us
• cloudoorsphere

If true, VM state changes (powerOn, powerOff, shutdown, reset, pause, resume) are executed outside the pool (not waiting for any operation), by type.
Default: abiquo.virtualfactory.openSession.faststatechanges

Automatically start Abiquo heartbeat
Default: true

The default maximum number of simultaneous operations on a single hypervisor
Default: 2

Description changed from "maximum" to "The default maximum" due to the introduction of more specific properties

The default maximum number of simultaneous operations on a single backup manager
Default: 2

Description changed from "maximum" to "The default maximum" due to the introduction of more specific properties

The default maximum number of simultaneous operations on a single device
Default: 2

Description changed from "maximum" to "The default maximum" due to the introduction of more specific properties

Pricing discount is defined in the enterprise properties. The property key is built using the hypervisor type in lowercase and adding a suffix, which is defined by this property
Default: _discount

Pricing pricefactor is defined in the enterprise properties. The property key is built using the hypervisor type in lowercase and adding a suffix, which is defined by this property
Default=_price_factor

AMQP consumer reconnection.  First attempt to restart in seconds
Default: 2

AMQP consumer reconnection.  Maximum number of seconds without restart attempt
Default: 2

Default maximum number of simultaneous operations on a single hypervisor or region connection.
Default: 2

If true, the max number of simultaneous operations apply to a single virtualdatacenter (instead of single hypervisor or region connection)
Default: false

Maximum hours without activity in a pool before release. Minimum value is 6, if a lower value is specified, will use 6
Default: 24

Maximum number of simultaneous operations on a single hypervisor or region connection, by type.
Default: abiquo.nars.async.pool.max

If true, the max number of simultaneous operations apply on a single virtual datacenter (instead of single hypervisor or region connection), by type.

Default: abiquo.nars.async.pool.byvdc

Limit of parallelism of async request execution. Number of unacknowledged messages from the requests queue.
Default: 4

API to NARS http client configuration: timeout in milliseconds used when requesting a connection. A value of 0 is interpreted as an infinite timeout. A negative value is interpreted as undefined
Default: -1

API to NARS client configuration: timeout in milliseconds when a connection is established. A value of 0 is interpreted as an infinite timeout. A negative value is interpreted as undefined
Default: -1

API to NARS http client pool configuration: When reusing a connection checks if the elapsed time since the last use exceeds this timeout.
Default: 5000

API to NARS http client pool configuration: Max active HTTP connections to any NARS.
Default: 50

API to NARS http client pool configuration: Max active HTTP connections to the same NARS instance.
Default: 10

API to NARS http client pool configuration: Max time to keep a persistent connection.
Default: 120000

API to NARS http client configuration: milliseconds to wait for a sync execution in the plugin. 
Implemented as socket timeout (SO_TIMEOUT) in milliseconds, which is the timeout for waiting for data or, put differently, a maximum period inactivity between two consecutive data packets). A value of 0 is interpreted as an infinite timeout. A negative value is interpreted as undefined
Default: -1

API to NARS http client configuration: milliseconds to wait for a sync execution in the plugin by type

API to NARS http client configuration: milliseconds to wait for a sync execution in the plugin by type and operation

Delay between executions of the pricing import check in hours
Default: 24

Timeout for Server/API connections to Nodecollector (Discovery manager) in milliseconds.
Default: 180000

For all CloudoorSphere properties, see CloudoorSphere

Property name changed from abiquo.cpp.cloudoorspherecpp