Deploy distributed scalable remote services

Install remote services and V2V server

The Remote services appliance contains the Abiquo private datacenter and public cloud provider management components. A Remote services appliance is required for each private datacenter.

The server appliance contains the Abiquo virtualization format conversion components, and it is isolated for performance reasons. This appliance creates conversions, so we recommend fast HD storage for it.

Requirements

Remote services installation requirements

• 2 CPUs

• 8 GB RAM

• 64 GB HD

V2V services installation requirements

• 2 CPUs

• 4 GB RAM

• 256 GB HD (Depending on template conversion requirements. Get in touch with Abiquo support for further information)

Install remote services and V2V server

The same steps apply to remote services and V2V servers

1. Download the remoteservices and v2vservices OVA files and launch them on your hypervisor

2. Enter the standard parameters, which are as follows:

   1. Friendly hostname, e.g. rs-ova and v2v-ova, which must be a valid Linux hostname

   2. Management interface IPv4 Address, e.g. 10.60.10.110, which should be a static network configuration

   3. Management interface IPv4 Netmask, e.g. 255.255.255.0

   4. Default Gateway, e.g. 10.60.10.1

   5. Space separated DNS Server list, e.g. 10.60.10.1

   6. Space separated NTP Server list, e.g. 10.60.10.1, which is required for features that depend on clock synchronization

3. Enter the remoteservices OVA parameters, which are as follows:

   1. Abiquo API server FQDN, e.g. server-ova.abiquo.com

      1. This FQDN must be resolvable from customer premises for SSL and the Appliance manager to work properly

   2. Abiquo Datacenter ID, e.g. 10.

      1. The datacenter ID must be unique for each DC, and all remote services and V2V appliances inside the DC must use the same datacenter ID

   3. NFS template repository, e.g. 10.60.10.25:/volume1/nfs-t.

      1. This is the NFS share for the VM repository of the DC. Each private DC must have a different NFS share

   4. RabbitMQ IP, e.g. 10.60.10.185, which is the IP address of the datanode server

4. Repeat the above steps for the V2V server

Remote services firewall requirements

V2V firewall requirements

Configure other firewalls

Additionally, open the following ports on the NFS server and hypervisors.

NFS server

Hypervisors

Validating the remote services and V2V services install

Log in to Abiquo and create a datacenter, then create a virtual datacenter, and deploy a VM. To do this, follow the steps in the Abiquo quick tutorial

Next steps

Install Abiquo Monitoring server. See Deploy distributed scalable monitoring server