Page Comparison

Timestep for the email provider. This is the amount of time the two-factor authentication codes will be valid when generated (seconds).
Default: 60

abiquo.2fa.issuer

Name of the issuer of the verification codes for two-factor authentication. This will appear in the user's Google Authenticator app to identify where the generated code comes from.
Default: Abiquo

Number of virtual infrastructure check executions that a locked VM with a pending task can pass before it will be marked as failed.

For the HTTP client that sends a web hook in action plans, timeout in milliseconds used when requesting a connection from the connection manager.
Default: 1000
Valid values: >0

abiquo.actionplan.webhook.client.connecttimeoutms

For the HTTP client that sends a web hook in action plans, timeout in milliseconds until a connection is established.
Default: 1000
Valid values: >0

abiquo.actionplan.webhook.client.maxclientsperroute

For the HTTP client that sends a web hook in action plans, maximum clients per route.
Default: 10

abiquo.actionplan.webhook.client.maxkeepalivems

For the HTTP client that sends a web hook in action plans, maximum time to live in pool.
Default: 120000

abiquo.actionplan.webhook.client.maxtotalclients

For the HTTP client that sends a web hook in action plans, maximum total clients in pool.
Default: 50

abiquo.actionplan.webhook.client.redirects.enabled

For the HTTP client that sends a web hook in action plans, if true, follow redirects in web hook responses
Default: false

abiquo.actionplan.webhook.client.sockettimeoutms

For the HTTP client that sends a web hook in action plans, timeout in milliseconds for waiting for data or, put differently, a maximum period of inactivity between two consecutive data packets.
Default: 1000
Valid values: >0

abiquo.actionplan.webhook.client.ttlms

For the HTTP client that sends a web hook in action plans, TTL in the pool in milliseconds.
Default: 5000

The number of consecutive health probe successes required before moving an AWS instance to the Healthy state.
Default: 3
Valid values: 2-10

abiquo.amazon.public.subnet.mask

Mask to use when creating the public subnet in AWS to configure NAT
Default: 24

abiquo.amazon.sleepbeforetry.seconds

Wait time between retries to create an AWS account
Default: 2

abiquo.amazon.waitforaccount.minutes

AWS wait for account creation
Default: 5

abiquo.amazon.waitforassumerole.minutes

AWS wait for assume role
Default: 5

abiquo.amazon.waitforstatus.timeout

AWS wait for status timeout
Default: 1200000

Path to file storing pending results from NARS to be processed in the API
Default: /opt/abiquo/results-api

abiquo.api.login.failurelapse

Lapse of time in seconds where abiquo.api.login.maxtries apply
Default: 60

abiquo.api.login.maxtries

Maximum login failures in a given lapse (abiquo.api.login.failurelapse).
Default: 3

abiquo.api.max.sessions

Maximum number of sessions per user in the API. The default value of -1 means there is no limit and a value of 0 is invalid.
Default: -1
Valid values: -1, >0

abiquo.api.networking.allowMultipleNicsVlan

Allow one NIC only per VLAN on a VM if false (or any other value).
Default: True

abiquo.api.networking.nicspervm

Limit of NICs per VM. If this is set to 0, there are no limits.
Default: 0

abiquo.api.session.cookie.name

Abiquo session cookie name. This session does not store anything.
Default: ABQSESSIONID

abiquo.api.zk.serverConnection

Location where ZooKeeper is listening in format <IP address>:<port> for example, 10.10.10.10:2181

Datacenter NFS repository refresh interval (milliseconds).
Default: 600000

abiquo.appliancemanager.checkMountedRepository

Perform the repository check against /etc/mtab. Set to false for local NFS Server installations in testing environment: NFS on Monolithic, V2V Server, or Remote Services Server.
Default: true

abiquo.appliancemanager.client.timeoutInMilliseconds

Timeout for HTTP connections to the ApplianceManager server when using the ApplianceManager client. This property configures read and connection timeout in milliseconds.
Default: 60000

abiquo.appliancemanager.deploy.connection

Timeout for HTTP connections to be established when downloading a VM template (milliseconds).
Default: 120000

abiquo.appliancemanager.deploy.idle

Timeout for idle HTTP connections when downloading a VM template (milliseconds)
Default: 600000

abiquo.appliancemanager.deploy.totalTimeout

Timeout for HTTP connections when downloading a VM template (milliseconds).
Default: 86400000

abiquo.appliancemanager.downloadingPublishInterval

Frequency of download progress notification in milliseconds.
Default: 1500

abiquo.appliancemanager.downloads

Maximum number of concurrent template downloads. A value of -1 means unlimited.
Default: -1

abiquo.appliancemanager.fstimeoutms

Maximum time for the appliance manager to perform a complete rescan of the repository filesystem in milliseconds.
Default: 7000

abiquo.appliancemanager.localRepositoryPath

Folder where the abiquo.appliancemanager.repositoryLocation is mounted on the remote services node.
Default: /opt/vm_repository

abiquo.appliancemanager.repository.ignoredPathPrefix

Path name prefixes to be ignored in the repository refresh (comma separated values).

abiquo.appliancemanager.repository.ignoredPathRegex

Path name pattern to be ignored in the repository refresh in Java regular expression format.

abiquo.appliancemanager.repository.ignoredPathSuffix

Path name suffixes to be ignored in the repository refresh (comma separated values).

abiquo.appliancemanager.repositoryLocation

Local Appliance Library, NFS repository location denoted by nfs-server-address:exportpath.
Default: <IP-repoLoc>:/opt/vm_repository

abiquo.appliancemanager.upload.progressInterval

Interval to refresh progress of upload of VM template (milliseconds).
Default: 5000

If true, the API will allow the use of basic authentication on the login resource only. Other API calls must use token authentication and set the token with the value of the X-Abiquo-Token header in the login response.
Default: false

abiquo.auth.module

Whether Abiquo will authenticate via: database; database and LDAP/Active Directory; OpenID; or SAML.
Default: abiquo
Valid values: abiquo, ldap, openid, saml

abiquo.auth.token.validseconds

Time in seconds for the Abiquo authorization token to expire. This token is returned by the API in the X-Abiquo-Token header.
Default: 1800

Delay between checks of availability zones
Default: 24

Role template ID of the Directory role to assign to the application created using Create account. The default is the role template ID of the ''User Administrator'' role. See https://docs.microsoft.com/en-us/graph/api/resources/directoryroletemplate?view=graph-rest-1.0
Default: fe930be7-5e62-47db-91af-98c3a49a38b1

abiquo.azure.account.creation.appname

Name of the application registered during the account creation process on Azure.
Default: abiquo

abiquo.azure.account.creation.default.organizationregistrationnumber

Default organization registration number used in account creation if the country requires an organization registration number, but the number is not provided.
Default: ABQDEFAULT

abiquo.azure.account.creation.default.phone

Default phone number used in account creation if the country requires an organization registration number, but the phone number is not provided.
Default: ABQ-PHONE

abiquo.azure.account.creation.organizationregistrationnumber.countries

ISO 3166-1 alpha-2 code of the countries for which an organization registration number must be specified, in CSV format. Note that for all these countries, a phone number must also be provided. Only used for field verification before customer creation. See https://docs.microsoft.com/en-us/partner-center/develop/customer-resources#customercompanyprofile
Default: am,az,by,hu,kz,kg,md,ru,tj,uz,ua,ae

abiquo.azure.account.creation.polling.delay.seconds

Delay between polling requests for account creation.
Default: 10

abiquo.azure.account.creation.resource.provider.polling.delay.minutes

Delay between polling requests during wait for registration of resource providers
Default: 1

abiquo.azure.account.creation.resource.provider.timeout.minutes

Timeout to wait for registration of resource providers during account creation. A value of 0 will disable the wait and account creation will not wait for registration of resource providers to complete before ending the account creation process.
Default: 20

Publishers to filter out Azure billing line items. Configure on the server running the public cloud billing integration (usually the API server).

Example value to filter Office products: Microsoft Corporation

abiquo.azure.feign.connection.timeout.seconds

Connection timeout for Azure billing process.
Default: 10

abiquo.azure.feign.logger.level

Logger level for Feign HTTP client in Azure.
Default: none
Valid values: none, basic, headers, full

abiquo.azure.feign.read.timeout.seconds

Read timeout for Azure billing process.
Default: 60

For Azure ARM VPN, the Virtual Network Gateway requires a 'gateway subnet', if this does not exist, the plugin tries to create it in some available range of the virtual network and using the mask given by this property.
Default: 29

abiquo.azurecompute-arm.vpn.virtualnetworkgateway.sku.name

For Azure ARM VPN, the Virtual Network Gateway uses an SKU. If using a PolicyBased VPN, only the Basic SKU is supported. See https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-about-vpngateways#gwsku
Default: Basic
Valid values: Basic, HighPerformance, Standard, UltraPerformance, VpnGw1, VpnGw2, VpnGw3, VpnGw4, VpnGw5, VpnGw1AZ, VpnGw2AZ, VpnGw3AZ, VpnGw4AZ, VpnGw5AZ

abiquo.azurecompute-arm.vpn.virtualnetworkgateway.type

For Azure ARM VPN, the routing type to use for the Virtual Network Gateway. See: https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-about-vpngateways
Default: RouteBased
Valid values: RouteBased, PolicyBased

Delay between executions of the backup results check (milliseconds). The default is 10 minutes.
Default: 600000

abiquo.backup.{plugin}.config.path
- veeam
- networker
- rubrik

This property indicates where the backup plugin configuration file is located. The Tomcat user must be able to access the file. This property is only required for the API and the remote services that use the plugin: virtual-factory, nars Example: abiquo.backup.{plugin_type}.config.path
- veeam = /opt/abiquo/config/veeam.properties
- networker = /opt/abiquo/config/networker.properties
- rubrik = /opt/abiquo/config/rubrik.properties

Two character country code for azure REST API calls for standard subscriptions (not CSP).
Default: ES

abiquo.billing.execution.limit

Total number of billing executions allowed per day for each set of pricing credentials. To allow unlimited executions, set to 0
Default: 2

abiquo.billing.task.cron

Cron expression to run the consolidation of usage and cost from public cloud providers.
Default: 0 30 0 ? * * *

reCAPTCHA private key for user password reset. Obtain keys from Google.

Update DHCP during VM capture
Default: false

Frequency of running the consolidation of accounted usage from providers.
Default: 24
Valid values: >0

Identify the AMQP datacenter queues. The Datacenter ID is used for building routing keys and queue names, so that they are unique for each datacenter. Warning: Do not change this property! This property is required and its value is generated at installation. You can recover the property's value through the API with Get Datacenter.
Default: Abiquo

Folder where the platform should store lease information

abiquo.dnsmasq.reloadscript

Script to reload a running instance of dnsmasq

abiquo.dnsmasq.serviceiface

Use this network interface to attach bridged VLAN interfaces

abiquo.dnsmasq.startscript

Script to start a new instance of dnsmasq on a bridged VLAN interface

abiquo.dnsmasq.stopscript

Script to stop and clean up a running instance of dnsmasq on a bridged VLAN interface

Delay between executions of DRaaS sync in seconds
Default: 60

abiquo.draas.pg.journalhistory.hours

Default journal history hours for protection groups
Default: 24

abiquo.draas.pg.priority

Default priority for protection groups
Default: Medium
Valid values: Low, Medium, High

abiquo.draas.pg.rpo.seconds

Default recovery point objective seconds for protection groups
Default: 180

abiquo.draas.recovery.cluster.name

Default host name where the selected VMs will be recovered by the DRaaS provider. It can include a wildcard (*) to match any string.
Default: *Cluster*

abiquo.draas.recovery.datastore.name

Default datastore name that the VMs will use when recovered by the DRaaS provider. It can include a wildcard (*) to match any string.
Default: *datastore-local*

abiquo.draas.recovery.folder.name

Default folder name where the selected VMs will be recovered by the DRaaS provider. It can include a wildcard (*) to match any string.
Default: /

abiquo.draas.recovery.network.name

Default network used for recovery by the DRaaS provider. It can include a wildcard (*) to match any string. In the recovery vCenter you must create a network for each enterprise, and you may create a matching external network in Abiquo. If there is more than one enterprise, the first part of the network name is this property's value, and the second part is the value of an enterprise property with a key of ''DR-code'', for example, ''DraasnetEnterprise1''.
Default: Draasnet

abiquo.draas.recovery.testnetwork.name

Default network used for failover testing by the DRaaS provider. It can include a wildcard (*) to match any string. In the recovery vCenter you must create a test network for each enterprise. If there is more than one enterprise, the first part of the network name is this property's value, and the second part is the value of an enterprise property with a key of ''DR-code'', for example, ''DraasTestnetEnterprise1''.
Default: DraasTestnet

Network adapter teaming policy for DVS port groups. This property controls the algorithm used for network adapter load balancing when multiple NICs are used in 'teaming mode'.
Default: loadbalance_ip
Valid values: loadbalance_ip, loadbalance_srcid

abiquo.dvs.portgroup.maxsize

Number of available ports in each port group.
Default: 48

Values to filter out from column lineItem/lineItemType from AWS billing CSVs. Configure on the server running the public cloud billing integration (usually the API server)

Number of months of bills to download and regenerate counting back from the current date. Regeneration is done with data from cost usage details.
Default: 2

abiquo.enterprise.property.discount.suffix

Pricing discount is defined in the enterprise properties. The property key is built using the hypervisor type in lower case and adding a suffix that is defined using this property.
Default: _discount

abiquo.enterprise.property.pricefactor.suffix

Pricing price factor is defined in the enterprise properties. The property key is built using the hypervisor type in lower case and adding a suffix that is defined using this property.
Default: _price_factor

For the CD device used by cloud-init, if this property is true, use the SATA disk controller. If not specified or false, use IDE

abiquo.esxi.datastoreRdm

When using volumes, a VMFS datastore is required (Raw Device Mapping). If the supplied target datastore is not VMFS, then try to use the configured datastore.

com.abiquo.esxi.discovery.datastore.ignorebyname

If specified, filter datastores by name. For the filtered datastores, Abiquo will not check if the datastores are mounted or the Abiquo folder UUID. For example, 'some.*' will discard any datastore starting with 'some', and '.*some.*' will discard any datastore containing 'some'. Comma separated list of Java patterns.

com.abiquo.esxi.discovery.networkinterface.networks

Set this property to only use physical network interfaces connected to the specified networks when adding vCenter hosts or clusters. If ''onlymanagementip'' is true, then first check for IPs (management or not) in the specified networks and if none are found, use onlymanagementip filter. The property is a comma separated list of networks in CIDR format, in priority order

com.abiquo.esxi.discovery.networkinterface.onlymanagementip

If true, only use virtual NICs of the host that are configured for management traffic.
Default: false

com.abiquo.esxi.disk.enableuuid

Present Disk UUID as SCSI serial number in the guest OS
Default: true

abiquo.esxi.metrics.{metric}
- cpu
- cpu-mz
- cpu-time
- memory
- memory-swap
- memory-swap2
- memory-vmmemctl
- memory-physical
- memory-host
- disk-latency
- uptime

On ESXi, to prevent Abiquo from retrieving metrics, set the property to false for each metric you do not want to retrieve. After you change these properties, restart the Monitor Manager (VSM) remote service for the changes to take effect.
Default: true
Valid values: true, false

abiquo.esxi.metricsid.{metric}
- cpu
- cpu-mz
- cpu-time
- memory
- memory-swap
- memory-swap2
- memory-vmmemctl
- memory-physical
- memory-host
- disk-latency
- uptime

On ESXi, to support dynamic metric IDs, set a value to override the default metric ID as given in the table in Abiquo documentation on Override IDs of ESXi metrics. Contact Abiquo Support for more information about how to determine the required metric IDs.

abiquo.esxi.scsicontroller

Default VirtualSCSIController implementation when diskController is not specified.
Default: lsilogic
Valid values: lsilogic, paravirtual, bus, sas

com.abiquo.esxi.webmks

If true, enable console access to VMs on vCenter using WebMKS. This will automatically allow remote access to all vCenter VMs. If the VMs have VNC extradata, then use VNC; otherwise use WebMKS.
Default: false

com.abiquo.esxi.webmks.force

If true, force the use of WebMKS when it is enabled for console access to VMs in vCenter. During the next VM reconfigure, the platform will check for VNC extradata and remove it. This will ensure that remote access will be via WebMKS
Default: false

com.abiquo.esxi.webmks.proxypath

When ''com.abiquo.esxi.webmks'' is true (enabled), this property defines the path to a websocket proxy to avoid direct connection to ESXi hosts. You can configure a different value for each datacenter on its Remote Services server. The default of no value means the UI will attempt to connect directly to ESXi hosts.

Number of days of events to display in lists of events for the platform.
Default: 7

When true, for ESXi, import and capture VMs with volumes (except in position 0 in the disk sequence). The platform can capture the VMs but it does not register the external storage volumes as VM resources. After you capture VMs, you can add the volumes to the platform as Generic iSCSI volumes. If you do not add the volumes as Generic iSCSI volumes and you wish to add more external volumes, in order to prevent issues with the unregistered volumes, add volumes to a new SCSI controller of a different type
Default: false

abiquo.experimental.shareddisks.bypass

When true, bypass restriction on multiple VMs using the same disk. Ignore additional VMs using the same disk during capture. After deleting or releasing the first VM, to assign a disk to another VM, you must force the VM to synchronize with the hypervisor
Default: false

Publishers list for Google Cloud, consisting of a list of project names in CSV format. See https://cloud.google.com/compute/docs/images/os-details
Default: centos-cloud,cos-cloud,debian-cloud,fedora-coreos-cloud,rhel-cloud,rhel-sap-cloud,suse-cloud,suse-byos-cloud,suse-sap-cloud,ubuntu-os-cloud,windows-cloud,windows-sql-cloud

abiquo.googlecloud.waitforstartupscript.retry.seconds

Google Cloud time between retries when waiting for startup script to run
Default: 10

abiquo.googlecloud.waitforstartupscript.timeout.seconds

Google Cloud timeout when waiting for startup script to run
Default: 1200

abiquo.googlecloud.waitforstatus.retry.seconds

Google Cloud time between retries when waiting for status
Default: 5

abiquo.googlecloud.waitforstatus.timeout.seconds

Google Cloud timeout when waiting for status
Default: 180

Characters to avoid when generating guest passwords, for example: ,;$

abiquo.guest.password.length

Template to configure guest initial passwords that enables you to define the length and the character set. The following tokens are allowed in the template:

• lower= - configures the number of lower case characters to generate.
• upper= - configures the number of upper case characters to generate.
• numbers= - configures the number of numbers to generate.
• symbols= - configures the number of special characters to generate.
• global= - configures the number of total characters to generate.

For each token, the value must be in the following format:

• N - Generate this exact number of characters.
• N-M - Generate between N and M characters.
• N- - Generate at least N characters.
• -M - Generate at most M characters.

Examples:

1) Password with at least 2 lower case and upper case letters, between 2 and 4 special characters, and a total length of 10 characters:

abiquo.guest.password.length = lower=2-,upper=2-,numbers=0,symbols=2-4,global=10

2) Password with at least 5 characters, regardless of the content: abiquo.guest.password.length = global=5-

Default: lower=2-6,upper=2-6,numbers=2-6,symbols=2-6

IP Address of HTTP proxy for Appliance Manager/API to Internet communication (download template definition list, template definition, VM disk file)

abiquo.httpProxy.password

Password of HTTP proxy for Appliance Manager/API to Internet communication (download template definition list, template definition, VM disk file)

abiquo.httpProxy.port

Port of HTTP proxy for Appliance Manager/API to Internet communication (download template definition list, template definition, VM disk file)

abiquo.httpProxy.user

User of HTTP proxy for Appliance Manager/API to Internet communication (download template definition list, template definition, VM disk file)

CSV list of Samba hosts where the platform will discover shares to use as Hyper-V datastores. If not supplied, the platform will not try to discover shares.

Maximum hours without activity in a pool before release. The minimum value is 6, and if a lower value is specified, then the platform will use 6
Default: 24

Disk format type for instances taken in virtual datacenters for each hypervisor plugin (HV). Set to empty with no value to avoid any additional conversion (use the instance operation result format).
- vmx_04 = vmdk_sparse
- kvm = qcow2_sparse
- hyperv_301 =

The attribute in LDAP/Active Directory that will contain the Enterprise Name, which must be an enterprise in Abiquo.
Default: organizationname

abiquo.ldap.authentication.autoUserCreation

If true, Abiquo will create a user in Abiquo based on a successful login to LDAP.
Default: true

abiquo.ldap.authentication.custom.userDnPattern

Abiquo will perform an additional custom query against the specified schema in the LDAP/Active Directory. This value is required. The default value does not result in an additional query.
Default: cn={0},CN=Users

abiquo.ldap.authentication.server.baseDN

Base Distinguished Name of the LDAP/Active Directory
Default: DC=127.0.0.1,DC=local

abiquo.ldap.authentication.server.port

LDAP/Active Directory port. In LDAP mode this property is required, even if the server is listening at the default LDAP/Active Directory port.
Default: 389

abiquo.ldap.authentication.server.protocol

Protocol to use when authenticating to an LDAP/Active Directory.
Default: ldap
Valid values: ldap, ldaps

abiquo.ldap.authentication.server.url

LDAP/Active Directory server URL
Default: 127.0.0.1

abiquo.ldap.connection.timeout

Timeout to establish the connections to the LDAP/Active Directory server (milliseconds).
Default: 5000

abiquo.ldap.read.timeout

Timeout to complete the connections to the LDAP/Active Directory server (milliseconds).
Default: 10000

Specifies the value for the SameSite cookie flag. If the value is set to ''null'', the cookie will be sent without the SameSite flag.
Default: strict
Valid values: strict, lax, none, null

Unique name for an M instance. All M instances must set this property to a unique name. The name must be unique even between the members of the same cluster of M nodes.

Character set to be used in email notifications
Default: UTF-8

abiquo.mail.path

Path to email template and text .properties files for user password reset, two-factor authentication, guest password notifications, monitoring alert notifications.
Default: /opt/abiquo/config/mail

Enable/disable monitoring, alarms and alerts
Default: false

abiquo.monitoring.max.statistic.period.days

Maximum period in days for statistical metric queries through the API
Default: 7

AMQP consumer reconnection. Maximum seconds without restart attempt
Default: 60

abiquo.nars.async.amqp.backoff.minseconds

AMQP consumer reconnection. First attempt to restart in seconds
Default: 5

abiquo.nars.async.fileresults.path

Path to file storing pending results to be downloaded by the API. If the same datacenter is using multiple NARS instances, then this path should be a shared folder that is accessible from all the NARS instances in the same datacenter. This is because the async task can be processed by any NARS instance but the API will request the download from the IP of the remote service in the database.
Default: /opt/abiquo/results-nars

abiquo.nars.async.pendingpublish.minutes

Check for pending responses that failed to publish due to AMQP failure in NARS
Default: 10

abiquo.nars.async.pendingpublish.path

Path to file storing pending responses that failed to publish due to AMQP failure in NARS
Default: /opt/abiquo/amqp-messages/nars.pending

abiquo.nars.async.pool.byvdc

If true, the maximum number of simultaneous operations apply on a single virtualdatacenter (instead of single hypervisor or region connection)
Default: false

abiquo.nars.async.pool.inactivity.maxhours

Maximum hours without activity in a pool before release. The minimum value is 6, and if a lower value is specified, the platform will use 6.
Default: 24

abiquo.nars.async.pool.max

Default maximum number of simultaneous operations on a single hypervisor or region connection.
Default: 2

abiquo.nars.async.pool.{plugin}.byvdc
- amazon
- kvm
- vmx_04
- vcenter_cluster
- hyperv_301
- azurecompute-arm
- vcd
- e1c
- googlecloudplatform
- dnsmasq
- omapi
- nsx-ecmp
- logical
- nsx-nat
- nsx-gateway
- nsxt
- veeam95u4
- veeam10
- networker
- rubrik

If true, the maximum number of simultaneous operations apply on a single virtualdatacenter (instead of single hypervisor or region connection), by type. The default value is the value of abiquo.nars.async.pool.byvdc
Default: false

abiquo.nars.async.pool.{plugin}.max
- amazon
- kvm
- vmx_04
- vcenter_cluster
- hyperv_301
- azurecompute-arm
- vcd
- e1c
- googlecloudplatform
- dnsmasq
- omapi
- nsx-ecmp
- logical
- nsx-nat
- nsx-gateway
- nsxt
- veeam95u4
- veeam10
- networker
- rubrik
- zerto

Maximum number of simultaneous operations on a single hypervisor or region connection, by type. default abiquo.nars.async.pool.max
Default: 2
- zerto = 1

abiquo.nars.async.prefetch

Limit parallelism of asyncrequest execution. Number of unacknowledged messages from the requests queue.
Default: 50

Timeout to establish connections to the NSX manager in milliseconds. A value of 0 means no timeout.
Default: 0

abiquo.nsx.edge.cluster-id

vCenter cluster where the Edge appliances will be deployed.

abiquo.nsx.edge.datastore-id

vCenter datastores where the Edge appliances will be deployed. List of datastore identifiers in CSV format.

abiquo.nsx.edge.datastore-policy

Allocation policy for selection of datastores from list to deploy Edge appliances
Default: leastvms
Valid values: leastvms, mostspace

abiquo.nsx.edge.description

Edge description
Default: Managed by Abiquo

abiquo.nsx.edge.dhcp.size

Specify the size of the DHCP edge appliance (ecmp plugin)
Default: compact
Valid values: compact, large, quadlarge, xlarge

abiquo.nsx.edge.dvportgroup-id

vCenter distributed port where the uplink interfaces of the Edges will be attached.

abiquo.nsx.edge.esg.size

Specify the size of the ESG edge appliance (gateway and ecmp plugin)
Default: compact
Valid values: compact, large, quadlarge, xlarge

abiquo.nsx.edge.plr-esg-id

ID of the Edge that acts as the PLR (nat plugin)

abiquo.nsx.edge.plr-transit-cidr

CIDR of the transit network network to be used between the PLR and the Edges of each Abiquo VDC (nat plugin)

abiquo.nsx.edge.plr-transit-ip

IP address from the PLR transit network to be assigned to the PLR. If not set, use the first IP address in the transit network (nat plugin).

abiquo.nsx.edge.public-network-cidr

Configure primary addresses of Edge uplink interfaces from this pool.

abiquo.nsx.firewall.applicationprotocols

Firewall protocols that are allowed to use services applications, aka ALG (Application Level Gateway). Collections separated by a hash ''#'' delimiter.
Default: FTP#SMB#ORACLE_TNS#MS_RPC_TCP#SUN_RPC_TCP

abiquo.nsx.load-balancer-acceleration

Enable load balancer acceleration in NSX load balancers.
Default: false

abiquo.nsx.load-balancer-reserved-ips

Number of IP addresses that are reserved for NSX in each private network to allocate to load balancers.
Default: 20

abiquo.nsx.nat.protocols

Allowed NAT rule protocols (nat plugin). Collections separated by a hash ''#'' delimiter.
Default: TCP,UDP,ANY,ICMP#ANY,ICMP#Parameter-Problem,ICMP#Echo-Request,ICMP#Destination-Unreachable,ICMP#Redirect,ICMP#Router-Solicitation,ICMP#Time-Exceeded,ICMP#Address-Mask-Request,ICMP#Timestamp-Reply,ICMP#Router-Advertisement,ICMP#Timestamp-Request,ICMP#Address-Mask-Reply,ICMP#Echo-Reply,ICMP#Source-Quench

abiquo.nsx.read-timeout-ms

Timeout to complete connections to the NSX manager in milliseconds. A value of 0 means no timeout.
Default: 0

abiquo.nsx.static-edge-gateway

If false, when modifying the gateway of a network only update the Edge interface address if the new gateway is not used in any of the DHCP leases.
Default: true

abiquo.nsx.transport-zone

The transport zone that logical switches will be connected to.

abiquo.nsx.use-edge-dhcp

Configure DHCP in Edge only for selected network types. The default is all network types (comma separated values).
Default: internal, external, public, unmanaged

abiquo.nsx.virtualwire.teaming

Set a teaming policy for the portGroup that is the backing for the VirtualWire when it is created. This value cannot be changed after it is created.
Default: failover_explicit
Valid values: failover_explicit, loadbalance_ip, loadbalance_loadbased, loadbalance_srcid, loadbalance_srcmac

Time to keep the lease in the NSX-T DHCP.
Default: 86400

abiquo.nsxt.infra.dhcp-conf-name

Name of the NSX-T DHCP Profile used to create Tier-1 VPCs. NSX-T UI path is: Policy - Networking - IP Management - DCHP

abiquo.nsxt.infra.edge-cluster-name

Name of the NSX-T Edge Cluster used to create Tier-1 VPCs. NSX-T UI path is: Policy - System - Fabric - Nodes - Edge Clusters

abiquo.nsxt.infra.load-balancers.error-log-level

Error log level of the NSX-T Load Balancers.
Default: INFO
Valid values: INFO, WARNING, ERROR, CRITICAL, ALERT, EMERGENCY

abiquo.nsxt.infra.load-balancers.reserved-ips

Number of IP addresses that are reserved for NSX-T in each private network to allocate to load balancers.
Default: 20

abiquo.nsxt.infra.load-balancers.size

Size of the NSX-T Load Balancer.
Default: SMALL
Valid values: SMALL, MEDIUM, LARGE, XLARGE

abiquo.nsxt.infra.tier0-external-ip

External IP used by the Tier-0.

abiquo.nsxt.infra.tier0-name

Name of the NSX-T Tier-0 used to create the Tier-1 VPCs. NSX-T UI path is: Policy - Networking - Tier-0 Gateway

abiquo.nsxt.infra.tier1.pool-allocation

Allocation size of Edges in pool defined in Tier-1.
Default: LB_SMALL
Valid values: ROUTING, LB_SMALL, LB_MEDIUM, LB_LARGE, LB_XLARGE

abiquo.nsxt.infra.transport-zone-name

Name of the NSX-T Transport Zone (overlay) used to create segments / networks. NSX-T UI path is: Policy - System - Fabric - Transport Zones

abiquo.nsxt.polling-ms

Time to wait between checks of the NSX-T API.
Default: 3000

Oracle Cloud Infrastructure polling delay during wait.
Default: 30

abiquo.oci.default.polling.termination.seconds

Oracle Cloud Infrastructure polling termination during waits.
Default: 600

abiquo.oci.public.subnet.mask

Oracle Cloud Infrastructure mask to use when creating the public subnet.
Default: 24

abiquo.oci.retry.delay.seconds

Oracle Cloud Infrastructure time to wait to retry an API call.
Default: 5

abiquo.oci.retry.max

Oracle Cloud Infrastructure maximum number of API call retries.
Default: 10

The OpenID Connect authorization endpoint. This endpoint must be accessible from the user's browser.

abiquo.openid.client.acr-validation

If true, validate acr values from jwt token when authenticating with an OpenID Connect Server
Default: true