Introduction to Abiquo Properties

The platform stores the configuration in the abiquo.properties file in Java properties format. There is one file on each server of the Abiquo platform (Abiquo Server, Remote Services, V2V Services). By default this file is located in the /opt/abiquo/config/ folder. The Abiquo Installer will create configuration files for your installation and example configuration files can be found in the directory /opt/abiquo/config/examples.

The platform uses the default values if you do not set the properties. However, some default configuration options may also be set outside of the Abiquo platform, for example, in the hypervisor.

To change the configuration options:

Edit the abiquo.properties file and add the properties you wish to change, then specify the new values.
1. Check carefully to ensure you have the correct values
2. Check that there is no white space around the properties
After you edit the file, restart the abiquo-tomcat service for the changes to take effect

Changes to Properties

For full details and changes to other versions, see Changes to Abiquo Configuration Properties

Changes to Abiquo Configuration Properties List

Click here to show/hide changes to properties in 5.4.x

Added in 5.4.0	API	RS
5.4.0
abiquo.ec2billing.parser.lineItemType.ignore	BILLING
abiquo.events.list.daysoffset	API
abiquo.nsxt.dhcp.leasetime-ms		RS
abiquo.nsxt.infra.dhcp-conf-name	API
abiquo.nsxt.infra.edge-cluster-name	API
abiquo.nsxt.infra.load-balancers.error-log-level		RS
abiquo.nsxt.infra.load-balancers.reserved-ips		RS
abiquo.nsxt.infra.load-balancers.size		RS
abiquo.nsxt.infra.tier0-name	API
abiquo.nsxt.infra.tier1.pool-allocation		RS
abiquo.nsxt.infra.transport-zone-name	API
abiquo.nsxt.polling-ms		RS
abiquo.oci.default.polling.delay.seconds		RS
abiquo.oci.default.polling.termination.seconds		RS
abiquo.oci.public.subnet.mask		RS
abiquo.oci.retry.delay.seconds		RS
abiquo.oci.retry.max		RS
5.4.1
Added in 5.4.1
abiquo.auth.token.validseconds	API
abiquo.ec2billing.parser.lineItemType.ignore		RS
abiquo.nsxt.infra.tier0-external-ip		RS
Changed in 5.4.1 (added plugins)
abiquo.backup.{plugin}.config.path rubrik		RS
abiquo.nars.async.pool.{plugin}.byvdc nsxt rubrik		RS
abiquo.nars.async.pool.{plugin}.max nsxt rubrik		RS
abiquo.virtualfactory.{plugin}.backup.openSession rubrik		RS
abiquo.virtualfactory.{plugin}.backup.openSession.byvdc rubrik		RS
abiquo.virtualfactory.{plugin}.device.openSession nsxt		RS
abiquo.virtualfactory.{plugin}.device.openSession.byvdc nsxt		RS
Amended in 5.4.1
abiquo.nsx.virtualwire.teaming	API
5.4.6
Added in 5.4.6
abiquo.azure.billing.parser.billinglineitem.publisher.ignore	BILLING

Key to the Abiquo Configuration Properties Table

Range: all range values are inclusive
Default: value for the platform. The hypervisor or provider may have a different default configuration
Info column symbols

– New property
– Changed property
– Deprecated Property

Abiquo Servers

API – Abiquo Server / API
RS – Remote Services
V2V – V2V Remote Services
OA – Outbound API

This table describes the abiquo.properties files of the Abiquo platform servers. For example, if a property is marked with an API symbol in the API column, you can configure it in the abiquo.properties file on the Abiquo Server/API and Abiquo Monolithic Server.

Abiquo Configuration Properties Table

Property	Description	API	RS	V2V	OA
abiquo.2fa.email.timestep	Timestep for the email provider. This is the amount of time the two-factor authentication codes will be valid when generated (seconds). Default: 60	API
abiquo.2fa.issuer	Name of the issuer of the verification codes for two-factor authentication. This will appear in the user's Google Authenticator app to identify where the generated code comes from. Default: Abiquo	API
abiquo.abiquo.task.ttl	Number of virtual infrastructure check executions that a locked VM with a pending task can pass before it will be marked as failed.	API
abiquo.actionplan.webhook.client.connectionrequesttimeoutms	For the HTTP client that sends a web hook in action plans, timeout in milliseconds used when requesting a connection from the connection manager. Default: 1000 Valid values: >0	API
abiquo.actionplan.webhook.client.connecttimeoutms	For the HTTP client that sends a web hook in action plans, timeout in milliseconds until a connection is established. Default: 1000 Valid values: >0	API
abiquo.actionplan.webhook.client.maxclientsperroute	For the HTTP client that sends a web hook in action plans, maximum clients per route. Default: 10	API
abiquo.actionplan.webhook.client.maxkeepalivems	For the HTTP client that sends a web hook in action plans, maximum time to live in pool. Default: 120000	API
abiquo.actionplan.webhook.client.maxtotalclients	For the HTTP client that sends a web hook in action plans, maximum total clients in pool. Default: 50	API
abiquo.actionplan.webhook.client.redirects.enabled	For the HTTP client that sends a web hook in action plans, if true, follow redirects in web hook responses Default: false	API
abiquo.actionplan.webhook.client.sockettimeoutms	For the HTTP client that sends a web hook in action plans, timeout in milliseconds for waiting for data or, put differently, a maximum period of inactivity between two consecutive data packets. Default: 1000 Valid values: >0	API
abiquo.actionplan.webhook.client.ttlms	For the HTTP client that sends a web hook in action plans, TTL in the pool in milliseconds. Default: 5000	API
abiquo.amazon.loadbalancer.healthcheck.healthythreshold	The number of consecutive health probe successes required before moving an AWS instance to the Healthy state. Default: 3 Valid values: 2-10		RS
abiquo.amazon.public.subnet.mask	Mask to use when creating the public subnet in AWS to configure NAT Default: 24		RS
abiquo.amazon.sleepbeforetry.seconds	Wait time between retries to create an AWS account Default: 2		RS
abiquo.amazon.waitforaccount.minutes	AWS wait for account creation Default: 5		RS
abiquo.amazon.waitforassumerole.minutes	AWS wait for assume role Default: 5		RS
abiquo.amazon.waitforstatus.timeout	AWS wait for status timeout Default: 1200000		RS
abiquo.api.fileresults.path	Path to file storing pending results from NARS to be processed in the API Default: /opt/abiquo/results-api	API
abiquo.api.login.failurelapse	Lapse of time in seconds where abiquo.api.login.maxtries apply Default: 60	API
abiquo.api.login.maxtries	Maximum login failures in a given lapse (abiquo.api.login.failurelapse). Default: 3	API
abiquo.api.max.sessions	Maximum number of sessions per user in the API. The default value of -1 means there is no limit and a value of 0 is invalid. Default: -1 Valid values: -1, >0	API
abiquo.api.networking.allowMultipleNicsVlan	Allow one NIC only per VLAN on a VM if false (or any other value). Default: True	API
abiquo.api.networking.nicspervm	Limit of NICs per VM. If this is set to 0, there are no limits. Default: 0	API
abiquo.api.session.cookie.name	Abiquo session cookie name. This session does not store anything. Default: ABQSESSIONID	API
abiquo.api.zk.serverConnection	Location where ZooKeeper is listening in format <IP address>:<port> for example, 10.10.10.10:2181	API
abiquo.appliancemanager.check.repository	Datacenter NFS repository refresh interval (milliseconds). Default: 600000		RS
abiquo.appliancemanager.checkMountedRepository	Perform the repository check against /etc/mtab. Set to false for local NFS Server installations in testing environment: NFS on Monolithic, V2V Server, or Remote Services Server. Default: true		RS
abiquo.appliancemanager.client.timeoutInMilliseconds	Timeout for HTTP connections to the ApplianceManager server when using the ApplianceManager client. This property configures read and connection timeout in milliseconds. Default: 60000		RS
abiquo.appliancemanager.deploy.connection	Timeout for HTTP connections to be established when downloading a VM template (milliseconds). Default: 120000		RS
abiquo.appliancemanager.deploy.idle	Timeout for idle HTTP connections when downloading a VM template (milliseconds) Default: 600000		RS
abiquo.appliancemanager.deploy.totalTimeout	Timeout for HTTP connections when downloading a VM template (milliseconds). Default: 86400000		RS
abiquo.appliancemanager.downloadingPublishInterval	Frequency of download progress notification in milliseconds. Default: 1500		RS
abiquo.appliancemanager.downloads	Maximum number of concurrent template downloads. A value of -1 means unlimited. Default: -1		RS
abiquo.appliancemanager.fstimeoutms	Maximum time for the appliance manager to perform a complete rescan of the repository filesystem in milliseconds. Default: 7000		RS
abiquo.appliancemanager.localRepositoryPath	Folder where the abiquo.appliancemanager.repositoryLocation is mounted on the remote services node. Default: /opt/vm_repository		RS
abiquo.appliancemanager.repository.ignoredPathPrefix	Path name prefixes to be ignored in the repository refresh (comma separated values).		RS
abiquo.appliancemanager.repository.ignoredPathRegex	Path name pattern to be ignored in the repository refresh in Java regular expression format.		RS
abiquo.appliancemanager.repository.ignoredPathSuffix	Path name suffixes to be ignored in the repository refresh (comma separated values).		RS
abiquo.appliancemanager.repositoryLocation	Local Appliance Library, NFS repository location denoted by nfs-server-address:exportpath. Default: <IP-repoLoc>:/opt/vm_repository		RS
abiquo.appliancemanager.upload.progressInterval	Interval to refresh progress of upload of VM template (milliseconds). Default: 5000		RS
abiquo.auth.basic.restricted	If true, the API will allow the use of basic authentication on the login resource only. Other API calls must use token authentication and set the token with the value of the X-Abiquo-Token header in the login response. Default: false	API
abiquo.auth.module	Whether Abiquo will authenticate via: database; database and LDAP/Active Directory; OpenID; or SAML. Default: abiquo Valid values: abiquo, ldap, openid, saml	API
abiquo.auth.token.validseconds	Time in seconds for the Abiquo authorization token to expire. This token is returned by the API in the X-Abiquo-Token header. Default: 1800	API
abiquo.availabilityzones.check.delayInHrs	Delay between checks of availability zones Default: 24	API
abiquo.azure.account.creation.app.directoryrole.templateid	Role template ID of the Directory role to assign to the application created using Create account. The default is the role template ID of the ''User Administrator'' role. See https://docs.microsoft.com/en-us/graph/api/resources/directoryroletemplate?view=graph-rest-1.0 Default: fe930be7-5e62-47db-91af-98c3a49a38b1		RS
abiquo.azure.account.creation.appname	Name of the application registered during the account creation process on Azure. Default: abiquo		RS
abiquo.azure.account.creation.default.organizationregistrationnumber	Default organization registration number used in account creation if the country requires an organization registration number, but the number is not provided. Default: ABQDEFAULT		RS
abiquo.azure.account.creation.default.phone	Default phone number used in account creation if the country requires an organization registration number, but the phone number is not provided. Default: ABQ-PHONE		RS
abiquo.azure.account.creation.organizationregistrationnumber.countries	ISO 3166-1 alpha-2 code of the countries for which an organization registration number must be specified, in CSV format. Note that for all these countries, a phone number must also be provided. Only used for field verification before customer creation. See https://docs.microsoft.com/en-us/partner-center/develop/customer-resources#customercompanyprofile Default: am,az,by,hu,kz,kg,md,ru,tj,uz,ua,ae		RS
abiquo.azure.account.creation.polling.delay.seconds	Delay between polling requests for account creation. Default: 10		RS
abiquo.azure.account.creation.resource.provider.polling.delay.minutes	Delay between polling requests during wait for registration of resource providers Default: 1		RS
abiquo.azure.account.creation.resource.provider.timeout.minutes	Timeout to wait for registration of resource providers during account creation. A value of 0 will disable the wait and account creation will not wait for registration of resource providers to complete before ending the account creation process. Default: 20		RS
abiquo.azure.billing.parser.lineitem.publisher.ignore	Publishers to filter out Azure billing line items. Configure on the server running the public cloud billing integration (usually the API server). Example value to filter Office products: Microsoft Corporation	BILLING
abiquo.azure.feign.connection.timeout.seconds	Connection timeout for Azure billing process. Default: 10		RS
abiquo.azure.feign.logger.level	Logger level for Feign HTTP client in Azure. Default: none Valid values: none, basic, headers, full		RS
abiquo.azure.feign.read.timeout.seconds	Read timeout for Azure billing process. Default: 60		RS
abiquo.azurecompute-arm.vpn.gatewaysubnet.mask	For Azure ARM VPN, the Virtual Network Gateway requires a 'gateway subnet', if this does not exist, the plugin tries to create it in some available range of the virtual network and using the mask given by this property. Default: 29		RS
abiquo.azurecompute-arm.vpn.virtualnetworkgateway.sku.name	For Azure ARM VPN, the Virtual Network Gateway uses an SKU. If using a PolicyBased VPN, only the Basic SKU is supported. See https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-about-vpngateways#gwsku Default: Basic Valid values: Basic, HighPerformance, Standard, UltraPerformance, VpnGw1, VpnGw2, VpnGw3, VpnGw4, VpnGw5, VpnGw1AZ, VpnGw2AZ, VpnGw3AZ, VpnGw4AZ, VpnGw5AZ		RS
abiquo.azurecompute-arm.vpn.virtualnetworkgateway.type	For Azure ARM VPN, the routing type to use for the Virtual Network Gateway. See: https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-about-vpngateways Default: RouteBased Valid values: RouteBased, PolicyBased		RS
abiquo.backup.check.delay	Delay between executions of the backup results check (milliseconds). The default is 10 minutes. Default: 600000	API
abiquo.backup.{plugin}.config.path - veeam - networker - rubrik	This property indicates where the backup plugin configuration file is located. The Tomcat user must be able to access the file. This property is only required for the API and the remote services that use the plugin: virtual-factory, nars Example: abiquo.backup.{plugin_type}.config.path - veeam = /opt/abiquo/config/veeam.properties - networker = /opt/abiquo/config/networker.properties - rubrik = /opt/abiquo/config/rubrik.properties		RS
abiquo.billing.azure.country_code	Two character country code for azure REST API calls for standard subscriptions (not CSP). Default: ES	API
abiquo.billing.execution.limit	Total number of billing executions allowed per day for each set of pricing credentials. To allow unlimited executions, set to 0 Default: 2	API
abiquo.billing.task.cron	Cron expression to run the consolidation of usage and cost from public cloud providers. Default: 0 30 0 ? * * *	API
abiquo.captcha.private.key	reCAPTCHA private key for user password reset. Obtain keys from Google.	API
abiquo.capturedhcp	Update DHCP during VM capture Default: false	API
abiquo.costusage.task.frequencyinhours	Frequency of running the consolidation of accounted usage from providers. Default: 24 Valid values: >0	API
abiquo.datacenter.id	Identify the AMQP datacenter queues. The Datacenter ID is used for building routing keys and queue names, so that they are unique for each datacenter. Warning: Do not change this property! This property is required and its value is generated at installation. You can recover the property's value through the API with Get Datacenter. Default: Abiquo		RS	V2V
abiquo.dnsmasq.basedir	Folder where the platform should store lease information		DNSMASQ
abiquo.dnsmasq.reloadscript	Script to reload a running instance of dnsmasq		DNSMASQ
abiquo.dnsmasq.serviceiface	Use this network interface to attach bridged VLAN interfaces		DNSMASQ
abiquo.dnsmasq.startscript	Script to start a new instance of dnsmasq on a bridged VLAN interface		DNSMASQ
abiquo.dnsmasq.stopscript	Script to stop and clean up a running instance of dnsmasq on a bridged VLAN interface		DNSMASQ
abiquo.draas.check.delay.seconds	Delay between executions of DRaaS sync in seconds Default: 60		RS
abiquo.draas.pg.journalhistory.hours	Default journal history hours for protection groups Default: 24		RS
abiquo.draas.pg.priority	Default priority for protection groups Default: Medium Valid values: Low, Medium, High		RS
abiquo.draas.pg.rpo.seconds	Default recovery point objective seconds for protection groups Default: 180		RS
abiquo.draas.recovery.cluster.name	Default host name where the selected VMs will be recovered by the DRaaS provider. It can include a wildcard () to match any string. Default: Cluster*		RS
abiquo.draas.recovery.datastore.name	Default datastore name that the VMs will use when recovered by the DRaaS provider. It can include a wildcard () to match any string. Default: datastore-local*		RS
abiquo.draas.recovery.folder.name	Default folder name where the selected VMs will be recovered by the DRaaS provider. It can include a wildcard () to match any string. Default: /*		RS
abiquo.draas.recovery.network.name	Default network used for recovery by the DRaaS provider. It can include a wildcard () to match any string. In the recovery vCenter you must create a network for each enterprise, and you may create a matching external network in Abiquo. If there is more than one enterprise, the first part of the network name is this property's value, and the second part is the value of an enterprise property with a key of ''DR-code'', for example, ''DraasnetEnterprise1''. Default: Draasnet*		RS
abiquo.draas.recovery.testnetwork.name	Default network used for failover testing by the DRaaS provider. It can include a wildcard () to match any string. In the recovery vCenter you must create a test network for each enterprise. If there is more than one enterprise, the first part of the network name is this property's value, and the second part is the value of an enterprise property with a key of ''DR-code'', for example, ''DraasTestnetEnterprise1''. Default: DraasTestnet*		RS
abiquo.dvs.portgroup.loadsharingmechanism	Network adapter teaming policy for DVS port groups. This property controls the algorithm used for network adapter load balancing when multiple NICs are used in 'teaming mode'. Default: loadbalance_ip Valid values: loadbalance_ip, loadbalance_srcid		RS
abiquo.dvs.portgroup.maxsize	Number of available ports in each port group. Default: 48		RS
abiquo.ec2billing.parser.lineItemType.ignore	Values to filter out from column lineItem/lineItemType from AWS billing CSVs. Configure on the server running the public cloud billing integration (usually the API server)		RS
abiquo.enterprise.property.billing.monthoffset	Number of months of bills to download and regenerate counting back from the current date. Regeneration is done with data from cost usage details. Default: 2	API
abiquo.enterprise.property.discount.suffix	Pricing discount is defined in the enterprise properties. The property key is built using the hypervisor type in lower case and adding a suffix that is defined using this property. Default: _discount	API
abiquo.enterprise.property.pricefactor.suffix	Pricing price factor is defined in the enterprise properties. The property key is built using the hypervisor type in lower case and adding a suffix that is defined using this property. Default: _price_factor	API
abiquo.esxi.cloudinit.sata	For the CD device used by cloud-init, if this property is true, use the SATA disk controller. If not specified or false, use IDE		RS
abiquo.esxi.datastoreRdm	When using volumes, a VMFS datastore is required (Raw Device Mapping). If the supplied target datastore is not VMFS, then try to use the configured datastore.		RS
com.abiquo.esxi.discovery.datastore.ignorebyname	If specified, filter datastores by name. For the filtered datastores, Abiquo will not check if the datastores are mounted or the Abiquo folder UUID. For example, 'some.' will discard any datastore starting with 'some', and '.some.*' will discard any datastore containing 'some'. Comma separated list of Java patterns.		RS
com.abiquo.esxi.discovery.networkinterface.networks	Set this property to only use physical network interfaces connected to the specified networks when adding vCenter hosts or clusters. If ''onlymanagementip'' is true, then first check for IPs (management or not) in the specified networks and if none are found, use onlymanagementip filter. The property is a comma separated list of networks in CIDR format, in priority order		RS
com.abiquo.esxi.discovery.networkinterface.onlymanagementip	If true, only use virtual NICs of the host that are configured for management traffic. Default: false		RS
com.abiquo.esxi.disk.enableuuid	Present Disk UUID as SCSI serial number in the guest OS Default: true		RS
abiquo.esxi.metrics.{metric} - cpu - cpu-mz - cpu-time - memory - memory-swap - memory-swap2 - memory-vmmemctl - memory-physical - memory-host - disk-latency - uptime	On ESXi, to prevent Abiquo from retrieving metrics, set the property to false for each metric you do not want to retrieve. After you change these properties, restart the Monitor Manager (VSM) remote service for the changes to take effect. Default: true Valid values: true, false	API
abiquo.esxi.metricsid.{metric} - cpu - cpu-mz - cpu-time - memory - memory-swap - memory-swap2 - memory-vmmemctl - memory-physical - memory-host - disk-latency - uptime	On ESXi, to support dynamic metric IDs, set a value to override the default metric ID as given in the table in Abiquo documentation on Override IDs of ESXi metrics. Contact Abiquo Support for more information about how to determine the required metric IDs.		RS
abiquo.esxi.scsicontroller	Default VirtualSCSIController implementation when diskController is not specified. Default: lsilogic Valid values: lsilogic, paravirtual, bus, sas		RS
com.abiquo.esxi.webmks	If true, enable console access to VMs on vCenter using WebMKS. This will automatically allow remote access to all vCenter VMs. If the VMs have VNC extradata, then use VNC; otherwise use WebMKS. Default: false		RS
com.abiquo.esxi.webmks.force	If true, force the use of WebMKS when it is enabled for console access to VMs in vCenter. During the next VM reconfigure, the platform will check for VNC extradata and remove it. This will ensure that remote access will be via WebMKS Default: false		RS
com.abiquo.esxi.webmks.proxypath	When ''com.abiquo.esxi.webmks'' is true (enabled), this property defines the path to a websocket proxy to avoid direct connection to ESXi hosts. You can configure a different value for each datacenter on its Remote Services server. The default of no value means the UI will attempt to connect directly to ESXi hosts.		RS
abiquo.events.list.daysoffset	Number of days of events to display in lists of events for the platform. Default: 7	API
abiquo.experimental.capturewithvolumes.bypass	When true, for ESXi, import and capture VMs with volumes (except in position 0 in the disk sequence). The platform can capture the VMs but it does not register the external storage volumes as VM resources. After you capture VMs, you can add the volumes to the platform as Generic iSCSI volumes. If you do not add the volumes as Generic iSCSI volumes and you wish to add more external volumes, in order to prevent issues with the unregistered volumes, add volumes to a new SCSI controller of a different type Default: false	API
abiquo.experimental.shareddisks.bypass	When true, bypass restriction on multiple VMs using the same disk. Ignore additional VMs using the same disk during capture. After deleting or releasing the first VM, to assign a disk to another VM, you must force the VM to synchronize with the hypervisor Default: false	API
abiquo.fqdn.label.pattern	Pattern to check between dots ''.'' in VM FQDN and network DNS suffix. Default: [a-zA-Z](([a-zA-Z0-9-]{1,61})?[a-zA-Z0-9])?	API
abiquo.googlecloud.public.image.projects	Publishers list for Google Cloud, consisting of a list of project names in CSV format. See https://cloud.google.com/compute/docs/images/os-details Default: centos-cloud,cos-cloud,debian-cloud,fedora-coreos-cloud,rhel-cloud,rhel-sap-cloud,suse-cloud,suse-byos-cloud,suse-sap-cloud,ubuntu-os-cloud,windows-cloud,windows-sql-cloud		RS
abiquo.googlecloud.waitforstartupscript.retry.seconds	Google Cloud time between retries when waiting for startup script to run Default: 10		RS
abiquo.googlecloud.waitforstartupscript.timeout.seconds	Google Cloud timeout when waiting for startup script to run Default: 1200		RS
abiquo.googlecloud.waitforstatus.retry.seconds	Google Cloud time between retries when waiting for status Default: 5		RS
abiquo.googlecloud.waitforstatus.timeout.seconds	Google Cloud timeout when waiting for status Default: 180		RS
abiquo.guest.password.exclude	Characters to avoid when generating guest passwords, for example: ,;$	API
abiquo.guest.password.length	Template to configure guest initial passwords that enables you to define the length and the character set. The following tokens are allowed in the template: lower= - configures the number of lower case characters to generate. upper= - configures the number of upper case characters to generate. numbers= - configures the number of numbers to generate. symbols= - configures the number of special characters to generate. global= - configures the number of total characters to generate. For each token, the value must be in the following format: N - Generate this exact number of characters. N-M - Generate between N and M characters. N- - Generate at least N characters. -M - Generate at most M characters. Examples: 1) Password with at least 2 lower case and upper case letters, between 2 and 4 special characters, and a total length of 10 characters: abiquo.guest.password.length = lower=2-,upper=2-,numbers=0,symbols=2-4,global=10 2) Password with at least 5 characters, regardless of the content: abiquo.guest.password.length = global=5- Default: lower=2-6,upper=2-6,numbers=2-6,symbols=2-6	API
abiquo.httpProxy.host	IP Address of HTTP proxy for Appliance Manager/API to Internet communication (download template definition list, template definition, VM disk file)	API	RS
abiquo.httpProxy.password	Password of HTTP proxy for Appliance Manager/API to Internet communication (download template definition list, template definition, VM disk file)	API	RS
abiquo.httpProxy.port	Port of HTTP proxy for Appliance Manager/API to Internet communication (download template definition list, template definition, VM disk file)	API	RS
abiquo.httpProxy.user	User of HTTP proxy for Appliance Manager/API to Internet communication (download template definition list, template definition, VM disk file)	API	RS
abiquo.hyperv.sambaHosts	CSV list of Samba hosts where the platform will discover shares to use as Hyper-V datastores. If not supplied, the platform will not try to discover shares.		RS
abiquo.inactivitysession.maxinhours	Maximum hours without activity in a pool before release. The minimum value is 6, and if a lower value is specified, then the platform will use 6 Default: 24		RS
abiquo.instance.targetDiskFormatType.{plugin} - vmx_04 - kvm - hyperv_301	Disk format type for instances taken in virtual datacenters for each hypervisor plugin (HV). Set to empty with no value to avoid any additional conversion (use the instance operation result format). - vmx_04 = vmdk_sparse - kvm = qcow2_sparse - hyperv_301 =	API
abiquo.ldap.authentication.attribute.enterprise	The attribute in LDAP/Active Directory that will contain the Enterprise Name, which must be an enterprise in Abiquo. Default: organizationname	API
abiquo.ldap.authentication.autoUserCreation	If true, Abiquo will create a user in Abiquo based on a successful login to LDAP. Default: true	API
abiquo.ldap.authentication.custom.userDnPattern	Abiquo will perform an additional custom query against the specified schema in the LDAP/Active Directory. This value is required. The default value does not result in an additional query. Default: cn={0},CN=Users	API
abiquo.ldap.authentication.server.baseDN	Base Distinguished Name of the LDAP/Active Directory Default: DC=127.0.0.1,DC=local	API
abiquo.ldap.authentication.server.port	LDAP/Active Directory port. In LDAP mode this property is required, even if the server is listening at the default LDAP/Active Directory port. Default: 389	API
abiquo.ldap.authentication.server.protocol	Protocol to use when authenticating to an LDAP/Active Directory. Default: ldap Valid values: ldap, ldaps	API
abiquo.ldap.authentication.server.url	LDAP/Active Directory server URL Default: 127.0.0.1	API
abiquo.ldap.connection.timeout	Timeout to establish the connections to the LDAP/Active Directory server (milliseconds). Default: 5000	API
abiquo.ldap.read.timeout	Timeout to complete the connections to the LDAP/Active Directory server (milliseconds). Default: 10000	API
abiquo.login.samesite	Specifies the value for the SameSite cookie flag. If the value is set to ''null'', the cookie will be sent without the SameSite flag. Default: strict Valid values: strict, lax, none, null	API
abiquo.m.instanceid	Unique name for an M instance. All M instances must set this property to a unique name. The name must be unique even between the members of the same cluster of M nodes.				OA
abiquo.mail.charset	Character set to be used in email notifications Default: UTF-8	API
abiquo.mail.path	Path to email template and text .properties files for user password reset, two-factor authentication, guest password notifications, monitoring alert notifications. Default: /opt/abiquo/config/mail	API
abiquo.monitoring.enabled	Enable/disable monitoring, alarms and alerts Default: false	API	RS
abiquo.monitoring.max.statistic.period.days	Maximum period in days for statistical metric queries through the API Default: 7	API
abiquo.nars.async.amqp.backoff.maxseconds	AMQP consumer reconnection. Maximum seconds without restart attempt Default: 60		RS
abiquo.nars.async.amqp.backoff.minseconds	AMQP consumer reconnection. First attempt to restart in seconds Default: 5		RS
abiquo.nars.async.fileresults.path	Path to file storing pending results to be downloaded by the API. If the same datacenter is using multiple NARS instances, then this path should be a shared folder that is accessible from all the NARS instances in the same datacenter. This is because the async task can be processed by any NARS instance but the API will request the download from the IP of the remote service in the database. Default: /opt/abiquo/results-nars		RS
abiquo.nars.async.pendingpublish.minutes	Check for pending responses that failed to publish due to AMQP failure in NARS Default: 10		RS
abiquo.nars.async.pendingpublish.path	Path to file storing pending responses that failed to publish due to AMQP failure in NARS Default: /opt/abiquo/amqp-messages/nars.pending		RS
abiquo.nars.async.pool.byvdc	If true, the maximum number of simultaneous operations apply on a single virtualdatacenter (instead of single hypervisor or region connection) Default: false		RS
abiquo.nars.async.pool.inactivity.maxhours	Maximum hours without activity in a pool before release. The minimum value is 6, and if a lower value is specified, the platform will use 6. Default: 24		RS
abiquo.nars.async.pool.max	Default maximum number of simultaneous operations on a single hypervisor or region connection. Default: 2		RS
abiquo.nars.async.pool.{plugin}.byvdc - amazon - kvm - vmx_04 - vcenter_cluster - hyperv_301 - azurecompute-arm - vcd - e1c - googlecloudplatform - dnsmasq - omapi - nsx-ecmp - logical - nsx-nat - nsx-gateway - nsxt - veeam95u4 - veeam10 - networker - rubrik	If true, the maximum number of simultaneous operations apply on a single virtualdatacenter (instead of single hypervisor or region connection), by type. The default value is the value of abiquo.nars.async.pool.byvdc Default: false		RS
abiquo.nars.async.pool.{plugin}.max - amazon - kvm - vmx_04 - vcenter_cluster - hyperv_301 - azurecompute-arm - vcd - e1c - googlecloudplatform - dnsmasq - omapi - nsx-ecmp - logical - nsx-nat - nsx-gateway - nsxt - veeam95u4 - veeam10 - networker - rubrik - zerto	Maximum number of simultaneous operations on a single hypervisor or region connection, by type. default abiquo.nars.async.pool.max Default: 2 - zerto = 1		RS
abiquo.nars.async.prefetch	Limit parallelism of asyncrequest execution. Number of unacknowledged messages from the requests queue. Default: 50		RS
abiquo.nsx.connection-timeout-ms	Timeout to establish connections to the NSX manager in milliseconds. A value of 0 means no timeout. Default: 0		RS
abiquo.nsx.edge.cluster-id	vCenter cluster where the Edge appliances will be deployed.		RS
abiquo.nsx.edge.datastore-id	vCenter datastores where the Edge appliances will be deployed. List of datastore identifiers in CSV format.		RS
abiquo.nsx.edge.datastore-policy	Allocation policy for selection of datastores from list to deploy Edge appliances Default: leastvms Valid values: leastvms, mostspace		RS
abiquo.nsx.edge.description	Edge description Default: Managed by Abiquo		RS
abiquo.nsx.edge.dhcp.size	Specify the size of the DHCP edge appliance (ecmp plugin) Default: compact Valid values: compact, large, quadlarge, xlarge		RS
abiquo.nsx.edge.dvportgroup-id	vCenter distributed port where the uplink interfaces of the Edges will be attached.		RS
abiquo.nsx.edge.esg.size	Specify the size of the ESG edge appliance (gateway and ecmp plugin) Default: compact Valid values: compact, large, quadlarge, xlarge		RS
abiquo.nsx.edge.plr-esg-id	ID of the Edge that acts as the PLR (nat plugin)		RS
abiquo.nsx.edge.plr-transit-cidr	CIDR of the transit network network to be used between the PLR and the Edges of each Abiquo VDC (nat plugin)		RS
abiquo.nsx.edge.plr-transit-ip	IP address from the PLR transit network to be assigned to the PLR. If not set, use the first IP address in the transit network (nat plugin).		RS
abiquo.nsx.edge.public-network-cidr	Configure primary addresses of Edge uplink interfaces from this pool.		RS
abiquo.nsx.firewall.applicationprotocols	Firewall protocols that are allowed to use services applications, aka ALG (Application Level Gateway). Collections separated by a hash ''#'' delimiter. Default: FTP#SMB#ORACLE_TNS#MS_RPC_TCP#SUN_RPC_TCP		RS
abiquo.nsx.load-balancer-acceleration	Enable load balancer acceleration in NSX load balancers. Default: false		RS
abiquo.nsx.load-balancer-reserved-ips	Number of IP addresses that are reserved for NSX in each private network to allocate to load balancers. Default: 20		RS
abiquo.nsx.nat.protocols	Allowed NAT rule protocols (nat plugin). Collections separated by a hash ''#'' delimiter. Default: TCP,UDP,ANY,ICMP#ANY,ICMP#Parameter-Problem,ICMP#Echo-Request,ICMP#Destination-Unreachable,ICMP#Redirect,ICMP#Router-Solicitation,ICMP#Time-Exceeded,ICMP#Address-Mask-Request,ICMP#Timestamp-Reply,ICMP#Router-Advertisement,ICMP#Timestamp-Request,ICMP#Address-Mask-Reply,ICMP#Echo-Reply,ICMP#Source-Quench		RS
abiquo.nsx.read-timeout-ms	Timeout to complete connections to the NSX manager in milliseconds. A value of 0 means no timeout. Default: 0		RS
abiquo.nsx.static-edge-gateway	If false, when modifying the gateway of a network only update the Edge interface address if the new gateway is not used in any of the DHCP leases. Default: true		RS
abiquo.nsx.transport-zone	The transport zone that logical switches will be connected to.		RS
abiquo.nsx.use-edge-dhcp	Configure DHCP in Edge only for selected network types. The default is all network types (comma separated values). Default: internal, external, public, unmanaged		RS
abiquo.nsx.virtualwire.teaming	Set a teaming policy for the portGroup that is the backing for the VirtualWire when it is created. This value cannot be changed after it is created. Default: failover_explicit Valid values: failover_explicit, loadbalance_ip, loadbalance_loadbased, loadbalance_srcid, loadbalance_srcmac	API
abiquo.nsxt.dhcp.leasetime-ms	Time to keep the lease in the NSX-T DHCP. Default: 86400		RS
abiquo.nsxt.infra.dhcp-conf-name	Name of the NSX-T DHCP Profile used to create Tier-1 VPCs. NSX-T UI path is: Policy - Networking - IP Management - DCHP	API
abiquo.nsxt.infra.edge-cluster-name	Name of the NSX-T Edge Cluster used to create Tier-1 VPCs. NSX-T UI path is: Policy - System - Fabric - Nodes - Edge Clusters	API
abiquo.nsxt.infra.load-balancers.error-log-level	Error log level of the NSX-T Load Balancers. Default: INFO Valid values: INFO, WARNING, ERROR, CRITICAL, ALERT, EMERGENCY		RS
abiquo.nsxt.infra.load-balancers.reserved-ips	Number of IP addresses that are reserved for NSX-T in each private network to allocate to load balancers. Default: 20		RS
abiquo.nsxt.infra.load-balancers.size	Size of the NSX-T Load Balancer. Default: SMALL Valid values: SMALL, MEDIUM, LARGE, XLARGE		RS
abiquo.nsxt.infra.tier0-external-ip	External IP used by the Tier-0.		RS
abiquo.nsxt.infra.tier0-name	Name of the NSX-T Tier-0 used to create the Tier-1 VPCs. NSX-T UI path is: Policy - Networking - Tier-0 Gateway	API
abiquo.nsxt.infra.tier1.pool-allocation	Allocation size of Edges in pool defined in Tier-1. Default: LB_SMALL Valid values: ROUTING, LB_SMALL, LB_MEDIUM, LB_LARGE, LB_XLARGE		RS
abiquo.nsxt.infra.transport-zone-name	Name of the NSX-T Transport Zone (overlay) used to create segments / networks. NSX-T UI path is: Policy - System - Fabric - Transport Zones	API
abiquo.nsxt.polling-ms	Time to wait between checks of the NSX-T API. Default: 3000		RS
abiquo.oci.default.polling.delay.seconds	Oracle Cloud Infrastructure polling delay during wait. Default: 30		RS
abiquo.oci.default.polling.termination.seconds	Oracle Cloud Infrastructure polling termination during waits. Default: 600		RS
abiquo.oci.public.subnet.mask	Oracle Cloud Infrastructure mask to use when creating the public subnet. Default: 24		RS
abiquo.oci.retry.delay.seconds	Oracle Cloud Infrastructure time to wait to retry an API call. Default: 5		RS
abiquo.oci.retry.max	Oracle Cloud Infrastructure maximum number of API call retries. Default: 10		RS
abiquo.openid.authorization.endpoint	The OpenID Connect authorization endpoint. This endpoint must be accessible from the user's browser.	API
abiquo.openid.client.acr-validation	If true, validate acr values from jwt token when authenticating with an OpenID Connect Server Default: true	API
abiquo.openid.client.acr-values	Space separated values to send as acr values to an OpenID Connect Server when authenticating and to validate from jwt token if the 'acr-validation' property is true (default value)	API
abiquo.openid.client.id	The ID of the client that has been registered in the OpenID Connect server for the Abiquo platform.	API
abiquo.openid.client.name	The name of the client that has been registered in the OpenID Connect server for the Abiquo platform.	API
abiquo.openid.client.redirect-uris	Comma separated list of allowed redirect (callback) URIs used during the authentication flow. Must be: http://<api_endpoint>/api/openid_connect_login	API
abiquo.openid.client.scopes	Comma separated list of scopes to request during authentication. Must have at least: openid,profile,email Valid values: openid, profile, email, phone	API
abiquo.openid.client.secret	The secret of the client that has been registered in the OpenID Connect server for the Abiquo platform.	API
abiquo.openid.cookie.maxage	After openid auth flow, the API redirect adds a cookie with the access_token and the id_token. This cookie expires after 30 seconds by default, also configurable by this property (value in seconds). A negative value means that the cookie is not stored persistently and will be deleted when the Web browser exits. A zero value causes the cookie to be deleted. Default: 30	API
abiquo.openid.cookie.refreshtoken.include	If true, the OpenID authentication cookie will also contain the refresh token. Default: false	API
abiquo.openid.endsession.endpoint	If configured, Abiquo will attempt to perform a global logout using a request to this endpoint. This is part of the Session Management optional spec. This endpoint must be accessible from the user's browser.	API
abiquo.openid.enterprise-claim	The name of the claim returned by the authorization server that contains the enterprise names to map an Abiquo user to an Abiquo enterprise.	API
abiquo.openid.enterprise-property	If configured, Abiquo will try to find an enterprise that has a property with this name, and use its value to match the ''enterprise claim'' when resolving the user's enterprise. If not configured, Abiquo will look for an enterprise with the name returned in the ''enterprise claim''.	API
abiquo.openid.issuer	The OpenID Connect authorization issuer.	API
abiquo.openid.jwks.endpoint	The OpenID Connect JWKS endpoint. This endpoint must be accessible from the Abiquo server.	API
abiquo.openid.role-claim	The name of the claim returned by the authorization server that contains the role names to map a user's permissions to an Abiquo role.	API
abiquo.openid.target	The URL where the user will be redirected from the Identity Server upon successful authentication. Something like http://<abiquo_ui_host>/ui/#/dashboard	API
abiquo.openid.token.endpoint	The OpenID Connect token endpoint. This endpoint must be accessible from the Abiquo server.	API
abiquo.openid.userinfo.endpoint	The OpenID Connect user info endpoint. This endpoint must be accessible from the Abiquo server.	API
abiquo.pcr.template.check.delay	Delay between executions of the template check in public cloud providers (milliseconds). The default is 12 hours. Default: 43200000	API
abiquo.pcrsync.retrydelayms	Milliseconds to wait before retrying a synchronize of a public cloud region in the same enterprise and PCR. Default: 15000	API
abiquo.pcrsyncpool	Number of concurrent public cloud region synchronize operations at a given time, not in the same enterprise and PCR. Default: 3	API
abiquo.plugin-client.connectionrequesttimeout	API to NARS HTTP client configuration: timeout in milliseconds used when requesting a connection. A value of 0 means an infinite timeout. A negative value is interpreted as undefined (system default). Default: -1	API
abiquo.plugin-client.connectiontimeout	API to NARS HTTP client configuration: timeout in milliseconds until a connection is established. A value of 0 means an infinite timeout. A negative value is interpreted as undefined (system default). Default: -1	API
abiquo.plugin-client.pool.checkconnectionms	API to NARS HTTP client pool configuration: when reusing a connection, check if the elapsed time since the last use exceeds this timeout. Default: 5000	API
abiquo.plugin-client.pool.maxclients	API to NARS HTTP client pool configuration: maximum active HTTP connections to any NARS. Default: 50	API
abiquo.plugin-client.pool.maxclientsperendpoint	API to NARS HTTP client pool configuration: maximum active HTTP connections to the same NARS instance. Default: 10	API
abiquo.plugin-client.pool.maxkeepalivems	API to NARS HTTP client pool configuration: maximum time to keep a persistent connection. Default: 120000	API
abiquo.plugin-client.timeout	API to NARS HTTP client configuration: milliseconds to wait for a sync execution in the plugin. Implemented as a socket timeout (SO_TIMEOUT) in milliseconds, which is the timeout for waiting for data, meaning the maximum period of inactivity between two consecutive data packets. A value of 0 means an infinite timeout. A negative value is interpreted as undefined. Default: 300000	API
abiquo.plugin-client.timeout.download	API to NARS HTTP client configuration: milliseconds to wait for a download to be completed. Default: 600000	API
abiquo.plugin-client.timeout.{pluginType}	API to NARS HTTP client configuration: milliseconds to wait for a sync execution in the plugin by type.	API
abiquo.plugin-client.timeout.{pluginType}.{operationName}	API to NARS HTTP client configuration: milliseconds to wait for a sync execution in the plugin by type and operation.	API
abiquo.pluginmetadata.{pluginTypeLowerCase}.baseDiskFormatType	Override default plugin metadata to update the preferred format when requesting compatible conversions. Allowed values: any DiskFormatType. Single element that should be in 'compatibleDiskFormatTypes'. Default: VMDK_FLAT	API
abiquo.pluginmetadata.{pluginTypeLowerCase}.compatibleDiskFormatTypes	Override default plugin metadata to update the list of compatible formats. Allowed values: any DiskFormatType. List of comma separated values that should contain 'baseDiskFormatType'. Default: VMDK_FLAT,VMDK_SPARSE	API
abiquo.pluginmetadata.{pluginTypeLowerCase}.diskControllers	Override default plugin metadata to update the compatible controller. Allowed values: any DiskControllerType. List of comma separated values and the first one is used as the default. Default: SCSI,IDE	API
abiquo.pluginmetadata.{pluginTypeLowerCase}.ethernetDrivers	Override default plugin metadata to update the compatible Ethernet Driver. Allowed values: any EthernetDriver. List of comma separated values, and the first one is used as the default. Default: E1000, VMXNET3, PCNET32, VIRTIO	API
abiquo.pricing.credentials.check.delayInHrs	Delay between executions of the pricing credentials check (hours) Default: 720	API
abiquo.pricing.import.check.delayInHrs	Delay between executions of the pricing import check (hours) Default: 24	API
abiquo.rabbitmq.addresses	Define your RabbitMQ server(s) as a list of host:port values, separated by commas. Default: 127.0.0.1:5672	API	RS	V2V
abiquo.rabbitmq.connectionTimeout	Timeout for establishing a connection to RabbitMQ. The default value of 0 means to wait indefinitely until connection established or error (milliseconds). Default: 0	API	RS	V2V
abiquo.rabbitmq.password	RabbitMQ password Default: guest	API	RS	V2V
abiquo.rabbitmq.requestedHeartbeat	The initially requested heartbeat interval, in seconds. The default value of 0 means no heartbeat. Default: 0	API	RS	V2V
abiquo.rabbitmq.tls	Set to true if the RabbitMQ server has TLS enabled Default: false	API	RS	V2V
abiquo.rabbitmq.tls.trustallcertificates	If true, Abiquo will not enforce any server certificate authentication. Default: false	API	RS	V2V
abiquo.rabbitmq.username	RabbitMQ username Default: guest	API	RS	V2V
abiquo.rabbitmq.virtualHost	Virtual host where RabbitMQ runs Default: /	API	RS	V2V
abiquo.redis.host	Address where Redis is located. By default Redis is installed on the Abiquo Server in addition to the Remote Services server. In a monolithic install, the Redis host and port properties should point to the monolithic server. When configuring API load balancing, only the Abiquo Server Redis property should point to the central datanode. Default: 127.0.0.1	API	RS
abiquo.redis.port	Port where Redis is located. By default Redis is installed on the Abiquo Server in addition to the Remote Services server. In a monolithic install, the Redis host and port properties should point to the monolithic server. When configuring API load balancing, only the Abiquo Server Redis property should point to the central datanode. Default: 6379	API	RS
abiquo.repository.timeoutSeconds	Time in seconds to wait for checking if the .abiquo_repository file mark is present on the NFS repository filesystem, which helps in finding a slow NFS repository. Default: 10		RS
abiquo.saml.attributes.enterprise.claims	The SAML response attribute that contains the enterprise properties that will indicate the enterprise to assign the user to in a successful login. Accepts a comma-separated value with a composed string with the SAML attribute and the enterprise property name separated by a colon '':''. Pattern: <saml-attr1>:<ent-prop1>,<saml-attr2>:<ent-prop2>	API
abiquo.saml.attributes.role.claim	The SAML response attribute that will contain the role to assign to the user in a successful login	API
abiquo.saml.attributes.user.email.claim	The SAML response attribute that will contain the user's email Default: EmailAddress	API
abiquo.saml.attributes.user.firstname.claim	The SAML response attribute that will contain the user's first name Default: FirstName	API
abiquo.saml.attributes.user.id.claim	The SAML response attribute that will identify the user as unique. If not set, the principal will be used as identifier	API
abiquo.saml.attributes.user.lastname.claim	The SAML response attribute that will contain the user's last name Default: LastName	API
abiquo.saml.binding	The URN of the binding profile to allow	API
abiquo.saml.cookie.maxage	The time (in seconds) for the cookie with access tokens to expire after a successful login Default: 30	API
abiquo.saml.cookie.name	The name of the cookie to create after a successful login Default: ABQSAMLTOKENS	API
abiquo.saml.keys.encryption.alias	The alias of the encryption key stored in the keystore	API
abiquo.saml.keys.encryption.password	The password of the encryption key stored in the keystore	API
abiquo.saml.keys.keystore.password	Password to unlock the keystore file	API
abiquo.saml.keys.keystore.path	Path to the Java keystore containing the keys and certificates to encrypt and sign	API
abiquo.saml.keys.metadata.sign	Indicates if the SAML Requests must be signed Default: false	API
abiquo.saml.keys.signing.alias	The alias of the signing key stored in the keystore	API
abiquo.saml.keys.signing.password	The password of the signing key stored in the keystore	API
abiquo.saml.login.allow.enterprise.pool	Allow the use of multiple enterprises with the same enterprise claim property as a pool. Will assign the user to the first enterprise matched. Only valid for ''SAML'' mode, not for ''SAML + user'' (multiple IDPs). Default: false	API
abiquo.saml.metadata.generator.bindingSSO	Bindings to activate if the SP metadata must be generated by the API Default: POST,Artifact	API
abiquo.saml.metadata.identityprovider.default.id	The ID of the default IdP. Required for all SAML environments	API
abiquo.saml.metadata.identityprovider.path	The path of the IdP metadata to load. Supports comma separated values for multiple IdP file paths.	API
abiquo.saml.metadata.identityprovider.userdomain.map	Specify user domains and the IdPs to use for them. Supports comma separated equalities. For example, somedomain.com=someIdP,anotherdomain.com=anotherIdP	API
abiquo.saml.metadata.mode	Indicates if the SP metadata is provided or must be generated by the API. Default: generated Valid values: generated, provided	API
abiquo.saml.metadata.serviceprovider.path	The path of the SP metadata to load if the metadata mode is set to ''provided''.	API
abiquo.saml.mode	Specify the SAML integration mode to use, which can be ''single'' for SAML only, or ''multiple'' for Abiquo basic auth and SAML Default: single	API
abiquo.saml.redirect.endpoint	URI where Abiquo should redirect a successful login using SAML SSO. Something like: https://<your_env>/ui	API
abiquo.saml.redirect.error.endpoint	URI where Abiquo should redirect an unsuccessful login using SAML SSO. This property must be an endpoint, which can be relative to the UI endpoint, for example ''?error'', or an absolute endpoint that is a valid URI, for example, https://your.env.com/ui/?error=ERROR_CODE Default: ?error	API
abiquo.security.encrypt	This property must have the same value on all API and remote services servers. If true, Abiquo will read the custom seed file at ''/etc/abiquo/.store''. If you create the seed file, but the property is not true, Abiquo will use the default seed. Abiquo requires access to the configured seed file to work with passwords. If it is lost, you will need to regenerate ALL passwords stored in Abiquo. Default: false Valid values: true, false	API	RS	V2V
abiquo.server.api.location	URL where the API is running. For example, https://abiquo.example.com/api/ or http://80.169.25.32/api Default: http://127.0.0.1/api	API	RS
abiquo.server.mail.extra.{javaxMailProperty}	For each SMTP property available in Java Mail (see the full reference here: https://javaee.github.io/javamail/docs/api/com/sun/mail/smtp/package-summary.html) you can define an Abiquo propery to configure it by adding the ''abiquo.server.mail.extra.'' prefix. For example, you could configure ''mail.smtp.quitwait'' by setting the following property: abiquo.server.mail.extra.mail.smtp.quitwait = false	API
abiquo.server.mail.from	The sender of platform email notifications	API
abiquo.server.mail.password	Password for connecting to the mail server Default: none	API
abiquo.server.mail.port	The mail server port Default: 25	API
abiquo.server.mail.server	Address where the mail server is located Default: 127.0.0.1	API
abiquo.server.mail.ssl	If SSL should be used to connect to the mail server Default: false	API
abiquo.server.mail.tls	If TLS should be used to connect to the mail server Default: false	API
abiquo.server.mail.user	System user with privileges for connecting to the mail server Default: none@none.es	API
abiquo.server.remoteSpace.default	Default remote repository space (OVF package sources) attached to all appliance libraries Default: http://abiquo-repository.abiquo.com/ovfindex.xml	API
abiquo.server.sessionTimeout	Time the server waits before marking a client session as expired (minutes). Default: 30	API
abiquo.server.timeout	Time the server waits for long requests in milliseconds. The default value represents 7 days. Default: 600000000	API
abiquo.stale.sessions.check.delay	Delay between executions of the check for stale sessions (milliseconds). Default: 300000	API
abiquo.storage.check.delay	Delay between checks of the storage infrastructure (milliseconds) Default: 900000	API
abiquo.storage.forcesamecontrollertype	If true, the controller type for all additional disks will be the same one defined for the first template disk. Default: false	API
abiquo.storagemanager.netapp.aggrfreespaceratio	Recommended free space on NetApp aggregates. Default: 0.05 Valid values: 0 - 1	API
abiquo.storagemanager.netapp.debug	If true, record requests to ONTAP and responses in the Abiquo logs. Default: false	API
abiquo.storagemanager.netapp.initiatorGroupName	Optionally create an initial initiator group with this name. Default: abiGroup	API
abiquo.storagemanager.netapp.volumelunration	Optional ratio to allow a LUN of a provided size to fill on its container volume (volSize = lunSize * volumelunratio). Default: 1.3 Valid values: 1.3 - 1.9	API
abiquo.subscriptions.check.delayInHrs	Frequency in hours of the periodic check to clean up orphan VSM subscriptions for VMs that do not exist any more. Default: 24	API
abiquo.tagging.synccheckcron	Cron expression to run the periodic tag synchronization by enterprise Default: 0 0 /4 ? *	API
abiquo.tasks.history.size	Maximum length of task history in Redis for API/Server by owner. Default: 20	API
abiquo.tasks.trimmer.delay	Delay between executions of the trimmer of task history in Redis for API/Server (milliseconds). Default: 86400000	API
abiquo.vappspec.retrydelayms	Milliseconds to wait before retrying a virtual appliance spec materialization in the same virtual datacenter. Default: 15000	API
abiquo.vappspecpool	Number of concurrent virtual appliance spec materialization operations at a given time (not in the same virtual datacenter). Default: 3	API
abiquo.vcd.connectionTimeoutMs	Time to wait to establish the connection to vCloud Director (milliseconds) Default: 10000		RS
abiquo.vcd.fenceVapp	When true, the vCloud virtual appliance network is NATROUTED, which retains IP/MAC across deployments. When false, the vCloud virtual appliance network is BRIDGED Default: true		RS
abiquo.vcd.firewall.vappnetwork	If true, create vCloud firewall at vCloud vApp network level Default: false		RS
abiquo.vcd.login.timeoutMs	Maximum time to wait for login to vCloud Director (milliseconds) Default: 60000		RS
abiquo.vcd.metric.live.fallback	If it is not possible to retrieve historical metrics data for vCloud Director, attempt to use live metrics Default: true		RS
abiquo.vcd.metric.live.force	Do not try to retrieve historical metrics data for vCloud Director, only use live metrics Default: false		RS
abiquo.vcd.org.userRoleName	The name of the role for users created in vCloud Director. The role should be ''Organization Administrator'' or another role with equivalent privileges. The default value of ''default'' will use the role of the user that created the new user. Default: default		RS
abiquo.vcd.parentnetwork	Private network connection to allow outgoing traffic. Value can be ''none'' for isolated networks or any existing organization network name. The default value of ''edge-uplink'' will use the external network connected to the Edge gateway of the organization virtual datacenter. Default: edge-uplink		RS
abiquo.vcd.readTimeoutMs	Maximum time to wait to read from the connection to vCloud Director (milliseconds) Default: 30000		RS
abiquo.vcd.reserved-ips	Number of IP addresses that are reserved for vCloud Director in each private network to allocate to load balancers. Default: 20		RS
abiquo.vcenter.port.connection	Port for connection to vCenter (only used in NSX) Default: 443		RS
abiquo.vi.check.delay	Delay between executions of the virtual infrastructure check (milliseconds). Default: 900000	API
abiquo.virtualfactory.azure.storageaccountprefix	Prefix for Abiquo generated storage accounts Default: abq		RS
abiquo.virtualfactory.azurecompute-arm.maxconcurrentupdates	The maximum number of concurrent updates to a virtual machine in Azure ARM. Default: 5		RS
abiquo.virtualfactory.azurecompute-arm.operationtimeout	The timeout to consider an operation as failed in Azure ARM (seconds) Default: 46000000		RS
abiquo.virtualfactory.backup.openSession	Default maximum number of simultaneous operations on a single backup manager Default: 2		RS
abiquo.virtualfactory.backup.openSession.byvdc	If true, the maximum number of simultaneous operations apply to a single virtualdatacenter (instead of single backup manager) Default: false		RS
abiquo.virtualfactory.device.openSession	Default maximum number of simultaneous operations on a single device Default: 2		RS
abiquo.virtualfactory.device.openSession.byvdc	If true, the maximum number of simultaneous operations apply to a single virtualdatacenter (instead of single device). Default: false		RS
com.abiquo.virtualfactory.esxi.timeoutConnectionMs	Time to wait to establish the connection to ESXi (milliseconds) Default: 10000		RS
com.abiquo.virtualfactory.esxi.timeoutReadMs	Time to wait to read from the connection to ESXi (milliseconds) Default: 30000		RS
abiquo.virtualfactory.hyperv.automaticShutdownAction	Action to take for the VM when the host is shut down. Sets Msvm_VirtualSystemSettingData.AutomaticShutdownAction. See https://msdn.microsoft.com/en-us/Library/hh850257(v=vs.85).aspx. Default: 3 Valid values: 2, 3, 4		RS
abiquo.virtualfactory.hyperv.refreshMonitorJob.intervalms	Refresh interval in milliseconds for checking progress on operations that require monitoring of a job, such as disk copies. Default: 1000		RS
abiquo.virtualfactory.hyperv.repositoryLocation	The CIFS address //IP/resource/ where Windows can locate the virtual disk repository. Default: //<IP-repoLoc>/vm_repository		RS
abiquo.virtualfactory.hyperv.swapFileDataRoot	The path of a directory where swap files for the VM are stored. When the automaticShutdownAction property is set to save the VM state, swap files will be written to this location. Default: C:\ProgramData\Microsoft\Windows\Hyper-V		RS
abiquo.virtualfactory.kvm.fullVirt	If false, create libvirt machines in KVM using PC emulation (software emulation, slower). Emulation only works with x86 64-bit based hosts, including VMs. Default: true Valid values: true, false		RS
abiquo.virtualfactory.networking.bridgePrefix	Prefix to name used to identify the VLAN bridge in the KVM hypervisor nodes. Default: abiquo		RS
abiquo.virtualfactory.openSession	Default maximum number of simultaneous operations on a single hypervisor. Default: 2		RS
abiquo.virtualfactory.openSession.byvdc	If true, the maximum number of simultaneous operations apply to a single virtualdatacenter (instead of single hypervisor) Default: false		RS
abiquo.virtualfactory.openSession.faststatechanges	If true, the VM state changes (powerOn, powerOff, shutdown, reset, pause, resume) are executed outside the pool (not waiting any operation) Default: false		RS
abiquo.virtualfactory.pendingpublish.minutes	Check for pending responses that failed to publish due to AMQP failure in virtualfactory Default: 10		RS
abiquo.virtualfactory.pendingpublish.path	Path to file storing pending responses that failed to publish due to AMQP failure in virtualfactory Default: /opt/abiquo/amqp-messages/virtualfactory.pending		RS
abiquo.virtualfactory.{plugin}.backup.openSession - veeam95u4 - veeam10 - networker - rubrik	Maximum number of simultaneous operations on a single backup manager, by type. The default value is the value of abiquo.virtualfactory.backup.openSession Default: 2		RS
abiquo.virtualfactory.{plugin}.backup.openSession.byvdc - veeam95u4 - veeam10 - networker - rubrik	If true, the maximum number of simultaneous operations apply to a single virtualdatacenter (instead of single backup manager), by type. The default value is the value of abiquo.virtualfactory.backup.openSession.byvdc Default: false		RS
abiquo.virtualfactory.{plugin}.defaultloginname - azurecompute-arm - googlecloudplatform	The default login name if not specified in a provider template or by editing the template in the platform Default: abiquo		RS
abiquo.virtualfactory.{plugin}.defaultloginpassword - azurecompute-arm - googlecloudplatform	The default login password if not specified by editing the template in the platform Default: Password12345!		RS
abiquo.virtualfactory.{plugin}.device.openSession - dnsmasq - omapi - nsx-ecmp - logical - nsx-nat - nsx-gateway - nsxt	Maximum number of simultaneous operations on a single device, by type. The default value is the value of abiquo.virtualfactory.device.openSession Default: 2		RS
abiquo.virtualfactory.{plugin}.device.openSession.byvdc - dnsmasq - omapi - nsx-ecmp - logical - nsx-nat - nsx-gateway - nsxt	If true, the maximum number of simultaneous operations apply to a single virtualdatacenter (instead of single device), by type. The default value is the value of abiquo.virtualfactory.device.openSession.byvdc Default: false		RS
abiquo.virtualfactory.{plugin}.openSession - amazon - kvm - vmx_04 - vcenter_cluster - hyperv_301 - azurecompute-arm - vcd - e1c	Maximum number of simultaneous operations on a single hypervisor, by type. The default value is the value of abiquo.virtualfactory.openSession Default: 2		RS
abiquo.virtualfactory.{plugin}.openSession.byvdc - amazon - kvm - vmx_04 - vcenter_cluster - hyperv_301 - azurecompute-arm - vcd - e1c	If true, the maximum number of simultaneous operations apply to a single virtualdatacenter (instead of single hypervisor), by type. The default value is the value of abiquo.virtualfactory.openSession.byvdc Default: false		RS
abiquo.virtualfactory.{plugin}.openSession.faststatechanges - amazon - kvm - vmx_04 - vcenter_cluster - hyperv_301 - azurecompute-arm - vcd - e1c	If true, the VM state changes (powerOn, powerOff, shutdown, reset, pause, resume) are executed outside the pool (not waiting any operation), by type. The default value is the value of abiquo.virtualfactory.openSession.faststatechanges Default: false		RS
abiquo.vm.statsupdate.interval	Interval between executions of the VM standardized stats updater in milliseconds Default: 43200000	API
abiquo.vm.statsupdate.range.days	Number of days to consider in the statistic query executed by the VM standardized stats updater Default: 30	API
abiquo.vncport.max	Last port of the VNC range to be used when allocating VMs. Default: 65534	API
abiquo.vncport.min	First port of the VNC range to be used when allocating VMs. Default: 5900	API
abiquo.vsm.actor.creation.delay.{plugin} - vmx_04 - kvm - hyperv_301 - amazon	The delay in milliseconds added between the creation of actors on VSM startup for each hypervisor or public cloud plugin. Default: 0		RS
abiquo.vsm.backoff.enabled	Enable or disable backoff Default: false		RS
abiquo.vsm.hostsyncfrequency.{plugin} - vmx_04 - kvm - hyperv_301 - vcd - e1c	Time between executions of infrastructure check in milliseconds. Default: 300000		RS
abiquo.vsm.max.backoff	Maximum backoff time in seconds between connection errors to reduce load and logging of these errors. A counter has been added to register the number of failed attempts to connect to the hypervisor or public cloud to perform any type of operation. When rescheduling operations, Abiquo will multiply the maximum backoff time by the number of failed connection attempts to determine the wait time until the next try. If a connection is established, the error counter is reset. Default: 3600		RS
abiquo.vsm.measures.pusher.frequency	The heartbeat frequency of measurements pusher in milliseconds. Or the delay between reconnection process to Watchtower. Default: 10000		RS
abiquo.vsm.pollingfrequency.{plugin} - vmx_04 - kvm - hyperv_301 - vcd - e1c - amazon - azurecompute-arm - oci - googlecloudplatform	The delay between VSM polling of VMs in milliseconds for each hypervisor or public cloud plugin. Default: 5000 - amazon = 300000 - azurecompute-arm = 900000 - oci = 900000 - googlecloudplatform = 300000		RS
abiquo.vsm.vmmetrics.collectfrequency.{plugin} - vmx_04 - kvm - amazon - vcd - e1c - azurecompute-arm - googlecloudplatform - oci	The delay between VM metric recollection operations in milliseconds for each hypervisor or public cloud plugin. Default: 120000 - azurecompute-arm = 300000 - googlecloudplatform = 300000 - oci = 300000		RS
abiquo.vsm.vmsyncforcedpublishcount.{plugin} - vmx_04 - kvm - hyperv_301 - amazon - vcd - e1c - azurecompute-arm	Number of VM synchronizer executions before forcing a publish of VM definitions. The default value of 0 means never force. Default: 0		RS
abiquo.vsm.vmsyncfrequency.{plugin} - vmx_04 - kvm - hyperv_301 - amazon - vcd - e1c - azurecompute-arm - oci	The delay between VM synchronizer operations in milliseconds for each hypervisor or public cloud plugin. Default: 180000 - azurecompute-arm = 900000 - oci = 900000		RS
abiquo.vsm.vmsyncmode.fetchall.{plugin} - vcenter_cluster - vmx_04	Forces VSM VirtualMachineDefinitionsSyncOp to fetch all VMs before looking for differences in VM definitions. Default: true		RS
abiquo.watchtower.host	Address where watchtower is located Default: 127.0.0.1	API	RS
abiquo.watchtower.password	Watchtower password Default: xabiquo	API	RS
abiquo.watchtower.port	Port where watchtower is listening Default: 36638	API	RS
abiquo.watchtower.tls	Set to true if Watchtower server is TLS enabled Default: false	API	RS
abiquo.watchtower.tls.trustallcertificates	If true, Abiquo will not enforce any server certificate authentication. Default: false	API	RS
abiquo.watchtower.username	Watchtower username Default: admin	API	RS
jclouds.azurecompute.arm.publishers	Publishers to use for filtering Azure ARM templates as a comma-separated list. Display only templates from these publishers to improve performance Default: Canonical,RedHat,MicrosoftWindowsServer		RS
RemoteDisplay.vnc.keyMap	ESXi only: When using a VM as a VNC server, specify the language to use for the keyboard when supported VNC clients connect. If this property is not set, the hypervisor will use the default value of config.keymaps in client-config-custom.json or client-config-default.json, which is the US101 keyboard map (US English). This property is now the default setting to complement the VM configuration popup. See Configure Remote Access to Virtual Machines.		RS
veeam.vcenter.ip	vCenter IP to use backup now (snapshot) functionality in ''Veeam95u4+snapshot'' backup plugin. To load the plugin, you must set a value on the API Server		RS
veeam.vcenter.password	vCenter password to use backup now (snapshot) functionality in ''Veeam95u4+snapshot'' backup plugin. To load the plugin, you must set a value on the API server.		RS
veeam.vcenter.port	vCenter port to use backup now (snapshot) functionality in ''Veeam95u4+snapshot'' backup plugin. Default: 443		RS
veeam.vcenter.user	vCenter user to use backup now (snapshot) functionality in ''Veeam95u4+snapshot'' backup plugin. To load the plugin, you must set a value on the API server.		RS
vmware.snapshot.keep	Maximum number of snapshots for a VM in vCenter. If the user performs an additional backup now, then only the older snapshots are removed from vCenter. applies to ''VMWARE_SNAPSHOT'' and ''Veeam95u4+snapshot'' backup plugins. Set to '0' to keep all snapshots. Default: 2		RS
workflow.connect.timeout	Maximum waiting time in milliseconds to establish a connection with workflow endpoint. Default: 60000	API
workflow.read.timeout	Maximum waiting time in milliseconds to receive data from workflow endpoint. Default: 10000	API
zerto.feign.logger.level	Logger level for Feign HTTP client with Zerto. Default: none Valid values: none, basic, headers, full		RS
zerto.polling.delay.seconds	Delay between polling requests to update the status of Zerto tasks. Default: 60		RS
zerto.propagation.delay.seconds	Wait time that finished Zerto tasks require to propagate the changes. Default: 10		RS
zerto.ssl.allow.insecure	Allow Zerto plugin to use insecure connections Default: false		RS
zerto.task.timeout.seconds	The timeout to get a response from a provider task Default: 300		RS