Abiquo 5.0 enables the user to set a bandwidth for all the NSX NAT IPs in a virtual datacenter with Quality of Service (QoS traffic shaping) parameters. It requires a new privilege to Manage NAT bandwidth limit. During an upgrade or when you create a VDC, the new "natbandwidthlimit" attribute is present but you must edit the virtual datacenter to enable it in the platform and in the NSX.
To edit the bandwidth limit and apply it in the NSX:
- Select the virtual datacenter and go to Network → QoS
- Click the pencil edit button and set values for your virtual datacenter. The bandwidth limit is shared by all the NAT IPs configured in the Edge for the virtual datacenter, so be sure to allow enough for all of them.
To register changes that were made outside the platform, save the existing NAT bandwidth values. In the API, to register changes, send a POST request with the existing values.