Server
| Property | Value | Notes |
Hostname | _________________________________________ | |
Management IP address__________ |
| |
Management IP netmask |
| |
| Default gateway |
| |
| DNS server list |
| |
| NTP server list | ||
| Appliance public FQDN | This is the FQDN for the HTTP UI endpoint |
Remote services
| Property | Value | Notes |
Hostname | _________________________________________ | |
Management IP address__________ |
| |
Management IP netmask |
| |
| Default gateway |
| |
| DNS server list |
| |
| NTP server list | ||
| Server appliance FQDN | ||
| Abiquo Datacenter ID |
| This must be the same for the DC V2V appliance |
NFS template repository | This must be the same for the DC V2V appliance | |
| Server appliance RabbitMQ location |
V2V
| Property | Value | Note |
Hostname | _________________________________________ | |
Management IP address__________ |
| |
Management IP netmask |
| |
| Default gateway |
| |
| DNS server list |
| |
| NTP server list | ||
| Abiquo Datacenter ID |
| This must be the same for the DC Remote Services appliance |
NFS template repository | This must be the same for the DC Remote Services appliance | |
| Server appliance RabbitMQ location |
Monitoring
If you are deploying the optional monitoring appliance, you will need the parameters below too for the monitoring appliance installation:
| Property | Value | Notes |
Hostname | _________________________________________ | |
Management IP address |
| |
Management IP netmask |
| |
| Default gateway |
| |
| DNS server list |
| |
| NTP server list | ||
Server appliance RabbitMQ location |
| This must point to the Abiquo Server IP and RabbiMQ default port (5672) |