You will need to enter the following parameters about your environment during the monolithic install. These parameters configure your system to interact with the platform prerequisites that you must configure prior to the install.
...
This is an example for a trial deployment worksheets. Check Monolithic environment worksheet to get clean worksheets for your environment.
Monolithic
You will need the following parameters during the monolithic appliance installation. The bootstrap process will configure the appliance accordingly to your environment requirements:
Hostname | abq400_______________ | Value__________________________ | _________||||
Management IP address__________ | Notes10.60.30.180 | |||||
Management IP address |
| Interface of the VM in the management network | Management IP netmask |
| Netmask of the management networknetmask | 255.255.255.0 |
| Default gateway |
| Default gateway for the VM in the management network | DNS server list |
| IPs of DNS servers for the VM, separated by a blank space 10.60.30.1 | |
| DNS server list | 10.60.1.4 8.8.8.8 | |||||
| NTP server list | 10.60.1.4 8.8.8.8 | |||||
| Appliance public FQDN | abq400.agc.abiquo.com | |||||
| Abiquo Datacenter ID | datacenter1
| For intercommunication of datacenter components. The datacenter must be the same on all Remote Services and V2V servers in the same datacenter, and unique to this datacenter. | ||||
NFS Template repository |
| IP address and directory of NFS/CIFS Repository server to store the VM template repository. Each private cloud datacenter (and therefore each Remote Services and V2V server) must have its own NFS template repository, except private OpenStack cloud and Docker By default the directory is /opt/vm_repository. | ||||
Abiquo API Server FQDN |
| The fully qualified domain name of the Abiquo Server, in order for the Appliance manager to work with HTTPS for VM template operations.Template repository folder | 10.60.1.104:/volume1/nfs-devel |
Monitoring
If you are deploying the optional monitoring appliance, you will need the parameters below too for the monitoring appliance installation:
Hostname | wt400____________________________________ |
Management IP address__________ | 10.60.30.183 |
Management IP netmask | 255.255.255.0 |
| Default gateway | 10.60.30.1 |
| DNS server list | 10.60.1.4 8.8.8.8 |
| NTP server list | 10.60.1.4 8.8.8.8 |
RabbitMQ server address | 10.60.30.180 |