Page Comparison

...

To specify the use of SATA controllers with cloud-init:

1. Edit the abiquo.properties file on the Remote Services server

2. Set the following cloudinit.sata property

   Code Block
   abiquo.esxi.cloudinit.sata=true

3. Restart the Tomcat server

...

Use SATA controllers for ISO drives by default

The default controller list for ESXi plugins is now "SCSI, IDE, SATA". 

You cannot use SCSI for CD or DVD drives

So by default, the platform will use an IDE controller for attaching an ISO disk.

To use SATA controllers for ISO drives by default:

1. Edit the abiquo.properties file on the API server

2. Set the pluginmetadata disk controller properties for VMware and add SATA before IDE

...

1. .

   Code Block
   abiquo.pluginmetadata.{

...

1. HYPERVISOR_

...

1. TYPE}.diskControllers=SATA,SCSI,IDE

   For each hypervisor type to configure,

...

1. replace {HYPERVISOR_TYPE} in the property key with an appropriate code as follows

...

"esx" for ESXi hosts

...

1. , and set the property value.

   1. vmx_04

...

1. 1. for vCenter

...

1. 1. vcenter_cluster

...

1. 1. for vCenter clusters

2. Restart the Tomcat server

...

Disable SATA

To disable SATA, do these steps to remove SATA support:

1. Edit the abiquo.properties file on the API server

2. Set the pluginmetadata disk controller properties for VMware and remove SATA

   Code Block
   abiquo.pluginmetadata.{

...

1. HYPERVISOR_

...

1. TYPE}.diskControllers=IDE,SCSI

   For each hypervisor type to configure, set the property value, replacing

...

1. {HYPERVISOR_

...

1. TYPE} in the property key with one of the following codes:

...

"esx" for ESXi hosts

...

1. 1. vmx_04

...

1. 1. for vCenter

...

1. 1. vcenter_cluster

...

1. 1. for vCenter clusters

2. Restart the Tomcat server

...

Limitations and notes about SATA support

SATA support on guest operating systems is as follows.

• Abiquo always supports two SATA controllers with unit numbers from 0 to 19, even when the guest operating system may support more. 

• Abiquo uses the controller selected by the API, based on the user selection or the platform defaults. It does not use the recommendation of SATA controller for the Guest OS selected for the template.

• This feature also fixes some incorrect mappings of 32 bit operating systems for version 5.5: rhel7Guest, other3xLinuxGuest, debian7Guest, sles12Guest.

...

Use cases for controller changes 

Here are some notes about changing VM disk controllers:

• You can move a drive from IDE to SATA or from SATA to IDE but you must power off the VM first

• If you have a VM deployed with an ISO disk on an IDE controller, you can now change the controller to SATA. If the VM is not using any SATA disks, the platform will create the SATA controller.

• If you have a primary IDE disk at 0:0 plus an ISO disk at 0:1, then if you change the primary disk controller to SATA, then the CD-ROM will move to IDE 0:0