...
When does the business process manager / V2V conversion manager run?
...
No.
...
Action
...
When is it used
...
Module
...
1
...
It runs for conversions from one template format to another
...
, when loading a new template and when conversions are requested
...
v2v-diskmanager
...
2a
...
Conversion of a template to RAW
...
Step 1 of creating a persistent VM
...
v2v-diskmanager
...
2b
...
Dumping a RAW template to a volume
...
Step 2 of creating a persistent VM
...
mechadora
...
3a
...
Dumping a volume to a RAW disk
...
Step 1 of creating an instance of a persistent VM
...
mechadora
...
3b
...
Conversion of RAW to an Abiquo format
...
Step 2 of creating an instance of a persistent VM
...
v2v-diskmanager
Note: the (a) and (b) actions are automatically executed by Abiquo in sequential orderby the v2v-diskmanager module.
...
Possible issues with the BPM and V2V Server
...
The working folder for V2V Conversions is /opt/abiquo/v2v-conversions.
The completed conversions are stored in the catalogue in the formats folder.
...
Check the v2v-diskmanager process is running - see Service Management#v2v-diskmanager.:
ps aux | grep v2v
Check the mechadora process is running with
ps aux | grep mechadora
Using top
If a conversion is in progress and you are running "top", you will see the following:
...
The V2V properties are shown in the following sample file (by default this is: /opt/abiquo/config/examples/abiquo.properties.v2v)
Sample abiquo.properties on V2V Server
| Code Block |
|---|
[remote-services] abiquo.rabbitmq.host = <RabbitMQ-Server-IP> abiquo.rabbitmq.port = 5672 abiquo.rabbitmq.username = guest abiquo.rabbitmq.password = guest abiquo.datacenter.id = Abiquo |
You should set
abiquo.rabbitmq.hostto the IP address of the RabbitMQ Server. The default is the Abiquo Server.The
abiquo.datacenter.idshould be a unique value for each datacenter and the same value as for the Remote Services server.The other values should be set to appropriate values for your installation of RabbitMQ. You do not need to change these values for a default installation.
See Abiquo configuration properties
...
Yes, the NFS Repository is required on the V2V Conversion Services machine. Check that the NFS repository is mounted in the correct location. You can use the "df" command for example. The default location is /opt/vm_repository
...
Check the appropriate ports are open for the V2V Server
...