Page Comparison

...

When the Network Address Translation (NAT) integration is available in your environment, to display NAT IPs and NAT rules:

1. Go to Virtual datacenters → and select virtual datacenter →

2. Go to Network → NAT

   Image Modified

    

To display NAT rules for a VM:

1. Go to Virtual datacenters

2. Select the VM

3. Go to VM control panel → NAT

   Image Modified

To manage or display NAT rules for a VM:

...

1. Go to myCloud → Virtual datacenters → Virtual appliances

2. Edit your VM

3. If your VM does not yet have an IP, go to Network → NICs and add a private IP

4. Go to Network → DNAT

5. Click the + add button on the top right-hand side of the tab

6. Enter the details of the DNAT rule

   Image Modified

   1. For the Original (NAT IP), select the IP address to receive external connections

   2. Select the Protocol for the connection, which can include TCP, UDP, any, and ICMP

   3. For the Translated IP, select the private IP that is attached to the VM

   4. Optionally, select the checkbox to Use all ports OR
      Enter the Original port for external connections. You cannot use an Original port for a NAT IP in more than one NAT rule.
      The platform will display the ports that are already used in other rules for the selected NAT IP.
      AND for the Translated port, enter the port on the VM

7. Click Add

8. Save the VM

...

1. Go to Virtual datacenters → Virtual appliances

2. Edit your VM

3. If your VM does not yet have an IP, go to Network → NICs and add a private IP

4. Go to Network → SNAT

5. Click the + add button on the top right-hand side of the tab

6. Enter the addresses of the SNAT rule

   Image Modified

   1. For the Original IP, select the IP that is attached to the VM

   2. For the Translated (NAT IP), select the IP address to display for outgoing connections

7. Click Add

8. Save the VM

...