...
As part of the Abiquo NSX integration or NSX-T integration, you can use the NAT blueprint to configure virtual datacenters with NAT.
To configure the NSX-T integration, see Configure the Abiquo NSX-T integration.
To configure the NSX -T integration, see Configure the Abiquo NSX -T integration.
To configure NAT for a datacenter:
Go to Infrastructure → Private → select datacenter → Network → Devices
To define the NAT integration in Abiquo
For the NSX-V NAT T integration, create a NAT an NSX-T device
For the NSX-T V NAT integration, create an NSX-T a NAT device
...
Create a NAT network
...
Go to Infrastructure → Private or Public
Select a datacenter or region
Go to Servers view → Network → NAT
Click the + add button
Create networks with ranges of public IPs for NAT
The Netmask is the network mask in CIDR format.
For IPv4, the networks created in the platform the netmask can have a value from 16 to 30 inclusive, and for IPv6, it can have a value of 64, 56, or 48.The Device when using NSX is the device that will manage the NAT network
To add IP addresses to your network, click the + add button in the top right-hand corner of the Networks page.
Enter the Number of IPs to create and the From IP address (the first in the range). The From IP address must be a new address that does not already exist in the network. After creating the first IP address, the platform will try to create the other IPs and it will skip any existing IP addresses.
...
The NAT network and IPs will display on the NAT tab. In the same way as for public IPs, you can quarantine NAT IPs as required.
Screenshot: NAT networks and IPs in private cloud with NSX
...
When users create virtual datacenters, the platform can automatically configure a NAT IP, and users can manage NAT rules, and purchase additional NAT IPs. See Manage NAT for virtual datacenters
...
Manage NAT with the API
| Tip |
|---|
API Documentation For the Abiquo API documentation of this feature, see Abiquo API Resources and the page for this resource NatNetworksResource. |
...