...
To display the networks available to a virtual datacenter:
| Panel |
|---|
Privileges: Manage virtual network elements, Access external networks tab, Access public networks tab |
...
Create private network Amazon
...
Button | Action |
|---|---|
Name | Name of the network (VLAN). The name can contain up to 128 characters |
IPv6 | Select checkbox for IPv6 network
|
Network Address | Private address range of the network |
Netmask | For IPv4 a network mask with an integer value of between 16 and 30 |
Gateway | Gateway of the VLAN. Must be an IP within the range of the network address and mask |
Internet gateway | In AWS, select this option to create a public subnet with a route to an internet gateway |
Availability zone | In AWS, optionally select an Availability zone for high availability. To deploy a group of VMs separately, use a different availability zone for each VM. To assign a VM to an availability zone, assign a private IP address in the network belonging to the required availability zone |
Primary DNS | The primary DNS. |
Secondary DNS | The secondary DNS |
DNS suffix | The DNS suffix. The Abiquo NSX-T integration does not use this attribute but you can enter it for information purposes. |
Excluded from firewall | Select Excluded from firewall to define a network where VM firewalls will not apply |
Static Routes | In supported providers, optionally select Define to create static routes. See Configure Static Routes using DHCP |
Default network | Select to make this network the default network, replacing the existing default network |
You can configure static routes when you create or edit a network. However, you should check with your systems administrator about when your VM will receive changes to static routes.
...
IPv6 Strict network
...
IPv6 Non-strict network
...
Field | Description |
|---|---|
Name | Name of the VLAN. The name can contain up to 128 characters |
IPv6 | Select checkbox for IPv6 network |
Strict | IPv6 only. If you select Strict, Abiquo will automatically generate the network address (ULA) and also the IP addresses. If you do not select strict, you can enter the network address and IP addresses. |
Netmask | Network mask of 48, 56 or 64. |
Network Address | Private address range of the network. Only for non-strict networks |
Primary DNS | The primary DNS |
Secondary DNS | The secondary DNS |
DNS suffix | The DNS suffix |
Default network | Make this network the default network. In a datacenter, this will override the existing default network |
...
Create IP addresses in private networks
...
The platform automatically onboards external networks when you onboard virtual datacenters from vCloud Director.
| Panel |
|---|
Privileges: Manage virtual network elements, Access external networks tab, Manage external network elements |
...
To set a network as the default, you will require privileges to access this network in the virtual infrastructure.
| Panel |
|---|
Privileges: Manage virtual datacenter network elements, Access public network tab, Manage public network elements, Access external network tab, Manage external network elements |
...
To add public IP addresses to your virtual datacenter, so that you can later assign them to your VMs:
| Panel |
|---|
Privileges: Manage virtual network elements, Manage floating IPs, Access public networks tab, Manage public network elements |
...
To onboard any public IP addresses that were already created in your cloud provider, or update changes made directly in the provider:
| Panel |
|---|
Privileges: Manage virtual network elements, Manage floating IPs, Access public networks tab, Manage public network elements |
...