Page Comparison

To create a rack:

1. Open the Infrastructure view and select Private and the datacenter name.
   If you are not on the Infrastructure details tab (with Servers, Network, etc.), open it by clicking the server button in the top right corner of the screen.

2. At the top of the DATACENTERS list, click the plus button 

3. Enter details of the Rack 
   

   Image RemovedImage Added

4. Click Network and enter details for your switch and environment.
   The platform will use these settings to create a pool of VLAN tags to assign to private networks
   

   Image RemovedImage Added

5. Click Save

To create datastore tiers

1. In the Infrastructure view, click the Datastore tiers tab, and click + Add add to create a datastore tier.tiers

   Image RemovedImage Added

2. On the Enterprise access tab, allow all enterprises to access the tier.

Task: Add a physical machine

1. Use the + button to create a new physical machine. For example, for vCenter.
   

   Image RemovedImage Added

   
   
   Select the hosts to add to Abiquo and configure them as described here.
   

   1. For each hypervisor host, you must enable a network interface (by assigning a Network Service Type).
      This is the network interface that is listening on VLANs.
      

      Image RemovedImage Added

      
      

   2. For each hypervisor host, you must enable at least one datastore (mark the checkbox). 
       Do not enable the vm_repository for use as a datastore.
      

      Image RemovedImage Added

2. Repeat the process of adding the physical machine for additional hypervisor hosts. Add the datastores to a datastore tier.

To create a public network and IPs

1. From the Infrastructure side, select Datacenter, Network tab, and select the "Public" sub-tab.

2. Click the + icon to add a VLAN

3. Fill in the necessary information and click Save
   

   Image RemovedImage Added

4. Create IPs as required. Click Accept

5. Review the list of available IPs and make unavailable any IPs that are required for administration purposes.
   Use the arrow button to move one or more IPs from available to unavailable

6. If you hear that a specific Public IP might have been misused, you can quarantine it can be quarantined. A quarantined IP cannot be used by any enterprise to provision to .
   Enterprise tenants cannot use quarantined IPs when they provision their VMs.
   Click the quarantine button to make an IP unavailable to enterprises in the 'PUBLIC IPS' table.

To create allocation rules

1. Select the data center and edit. Select the Allocation Rules tab
   

   Image RemovedImage Added

2. Add To add a new DATACENTER datacenter rule, on the right pane with the + icon. , click the + add button to.
   Select the Rule type such as 'Compute load level' as below. 
   This rule can be used for oversubscription of CPU in a test system.
   For example, in a test system with small VM templates, you could set RAM to 100% and CPU to 400%. 
   You can also set a storage load level rule for datastore usage.
   

   Image RemovedImage Added

   
   If you are adding a vCenter cluster directly as a physical machine, use the server rule not the cluster rule.
   

   Image RemovedImage Added

   
   

To add credentials for the current enterprise:

1. In the top rightbottom left-hand corner of the screen, click on the user icon.

2. From the dropdown menu, select Edit credentials
   

   Image RemovedImage Added

3. Select the cloud provider

4. Enter the Access key ID and the Secret access key

5. Click Add account
   

   Image RemovedImage Added

6. Click Close

The credentials will be added to the tenant's accountyour tenant in Abiquo.