Versions Compared

Old Version 30

changes.mady.by.user Lou M

Saved on

compared with

New Version Current

changes.mady.by.user MS

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Abiquo 5.0 enables the user to set a bandwidth in a virtual datacenter for all the NSX NAT IPs using Quality of Service (QoS traffic shaping) parameters.
This feature requires a new privilege to Manage NAT bandwidth limit. During  
During an upgrade or when you create a virtual datacenter, the new "natbandwidthlimit" attribute is present but you must edit the virtual datacenter to enable it in the platform and in the NSX. 

...

  1. Select the virtual datacenter and go to Network → QoS

  2. Click the pencil edit button 

    1. To enable the bandwidth limit in a specific direction, select the Enabled checkbox for that direction

    2. Set QoS values for your virtual datacenter.
      Be sure to allow enough bandwidth to share between all the NAT IPs in the virtual datacenter.

...

Expand
titleClick here to display details of edit NAT bandwidth limit

Field

Description

Provider ID

Read only

Enabled

To enable traffic shaping in a specific direction, select this checkbox

Average

The average amount of bandwidth, in bits per second, that the virtual datacenter can use

Peak

The maximum bandwidth in bits per second that the virtual datacenter can use

Burst size

The amount of data that can be transmitted at the peak bandwidth rate in bytes.
A burst bonus accumulates when traffic is below the Average value and this bandwidth can be used for bursts.

To register changes that were made outside the platform, save existing NAT bandwidth values.
In the API, to register changes, send a POST request with the existing values.

...