Page Comparison

Image Added

Related pages:

• Manage Scaling Groups

Define a scaling group

Before you begin:

1. Configure the base VM that will be scaled

2. Ensure that you have enough resources in your virtual datacenter to deploy up to the maximum number of cloned VMs, especially IP addresses

To create a scaling group:

1. Go to Virtual datacenters → Virtual appliances

2. On the VM icon, from the options menu, select Define scaling group

3. Enter the scaling parameters

1. Image Added

   1. For the Default cooldown, enter the period of time to wait from the start of one scaling operation before allowing another scaling operation

   2. For the Minimum running virtual machines that Abiquo must maintain in the scaling group, the value must be greater than or equal to zero, where zero means that the base machine is not deployed

   3. The option to Keep virtual machines in the same layer can maintain VM anti-affinity layers when autoscaling

   4. Administrators with the privilege to Manage workflow for scaling groups can Disable workflow or enable it as required

   5. Optionally, select Create in maintenance mode to delay the start of autoscaling, and the automatic deployment of VMs to meet the minimum size

   6. Select the option to Create autoscaling action to create basic operations to scale in and scale out, with triggers based on metrics and alarm conditions.

2. Create scaling rules

1. Image Added

   1. For Scale out rules, enter the number of VMs to Add. This isthe number of times to clone the base VM and deploy each clone for each scaling step

   2. For Scale in rules, enter the number of VMs to Remove. Abiquo will delete clone machines and undeploy the base machine

   3. If there is no time range, then this is a default scaling rule. A time range must be unique and cannot overlap with other rules with the same scaling direction. 

2. Click Save

When you save the scaling group, Abiquo will mark the VM icon with the scaling group symbol and display the scaling group name.

• When the scaling group leaves maintenance mode, Abiquo will create clones of the base VM and deploy them to reach the minimum size. 

• The number in the bottom right-hand corner of the icon is the number of running VMs in the scaling group, including the base VM.

To open the scaling group and check its parameters, click the scaling group symbol at the top of the VM icon.

Image Modified

---

Configure automatic scaling actions

To configure automatic scaling actions:

1. When you define a scaling group, select Create autoscaling action and Save the scaling group

2. In the dialog, select a Metric to control an autoscaling action

1. Image Added

2. To configure more options, including the thresholds for scaling in and scaling out, click Show more

1. Image Added

2. To add this action, click Add

3. Add more actions as required 

The platform will automatically create the alarms, alerts, and action plan to automatically scale in or out according to your thresholds.

Trigger autoscaling

Before you begin:

1. Create a VM and a scaling group for the VM. See Define a scaling group

   1. If you create an automatic scaling action, then the VM metrics will trigger autoscaling when they cross the thresholds set for the actions

To enable autoscaling operations to run:

1. Create an action plan with a scaling action for the VM with the scaling group. See Create an action plan to automate VM actions

2. Create triggers to run the action plan. See Create a trigger for an action plan

When scaling, the platform will search for a scaling rule that is valid for the specific time range, or for a default rule. It will create or delete/undeploy the number of VMs in the rule, then wait for the cooldown period before accepting another scaling request.

How the platform scales VMs

To scale out, the platform does not deploy VMs that are undeployed in the scaling group. To clone the base VM, the platform will do the following:

1. Create disks using the following:

   1. Copies of content of disks from the VM template

   2. Empty disks or volumes for each additional disk used in the VM

   3. Disk controllers used in the VM

2. Apply ALL configuration used in the VM, for example:

   1. CPU and RAM

   2. Network connections of the same type (e.g. private network)

   3. Assignment of firewall policies and attachment to load balancers

   4. Backups, startup script, cloud-init, variables, and so on

   5. Metrics. The group of metrics from clone VMs and the base VM (if it is deployed) can activate alarms in the base VM, even if it is not deployed

   6. Exception – Alarms: the scaling group has only one set of alarms in the base VM

To scale in,  Abiquo currently selects the VMs to delete or undeploy using first in, first out (FIFO). The platform deletes and undeploys VMs without requesting user confirmation when there are disks that are not stored in the Apps library (ISO configuration drive or additional hard disk). 

Perform maintenance on a scaling group

To make changes to your VMs in a scaling group (manually deploy, undeploy, delete, etc.) and edit the scaling group, put it into maintenance mode, which will disable autoscaling. 

When you leave maintenance mode, the platform will apply your modifications to the scaling group, e.g. adding new rules. Then the platform will adjust the number of VMs in the group to within the minimum and maximum size range.

To put the scaling group in maintenance mode:

1. Go to Virtual datacenters → Virtual appliances → select VM

2. At the bottom of the VM icon, click the cog maintenance symbol at the bottom of the VM icon

1. Image Added

   OR if the scaling group is open, click the spanner maintenance symbol in the top right corner

1. Image Added

To leave maintenance mode

1. Click a maintenance button

To automatically manage maintenance mode

1. Trigger action plans with the action "Scaling group: start maintenance mode" or "Scaling group: end maintenance mode".

To delete the base VM, you must delete the scaling group first. 

Display scaling actions for a scaling group

To display scaling actions of a scaling group:

1. Go to Virtual datacenters → Virtual appliances → open virtual appliance

2. If the scaling group is not in maintenance mode, click the cog maintenance symbol 

3. Edit the scaling group and go to Autoscaling actions

4. To show or hide more details of a scaling action, click Show more or Show less

Image Added

You can also display all the elements created for the automatic scaling action in the relevant sections of the UI, such as the Alarms tab, and the Control view. 

Display metrics for a scaling group

Abiquo can display custom metrics for your scaling groups and built-in metrics for the VMs in the scaling group.

Scaling groups also have built-in metrics that are a composite of the VM metrics, and which have the same names as the VM metrics. The Abiquo UI does not display the built-in scaling group metrics but you can access them through the Abiquo API. 

To display metrics for a scaling group:

1. On the Scaling group icon, click the Monitoring symbol in the top right-hand corner

1. Image Added

   OR Open a Scaling group and click the Monitoring symbol 

2. Select the Scaling group or Virtual machines page

You can configure the display of metrics at this level.

• To filter metric statistics, click on the Filter button and select the granularity, statistic, time frame, and dimension, as required.

Screenshot: Scaling group view with Monitoring symbol

Image Added

Screenshot: Scaling group metrics popup - Virtual machine metrics page

Image Added

Screenshot: Scaling group metrics popup - Scaling group metrics page

Image Added

Add tags to a scaling group

To manage tags for a scaling group: 

1. Go to Virtual appliances → Virtual machines

2. Select a scaling group and put it into maintenance mode

3. Open and edit the scaling group and go to Tags

4. Add tags 

1. Image Added

   For entities that exist in the platform only, such as virtual appliances and scaling groups, the user can create tags in the platform only.

   To add a tag, enter the Key and Value, then click Add. 

   To edit a tag field, click the pencil edit button 

   To delete a tag, select the tag, then click the trash bin delete button.

   To save your changes, click Save.

Move a scaling group to another virtual appliance in the same virtual datacenter

To move a scaling group to another virtual appliance in the same virtual datacenter:

1. Put the scaling group in maintenance mode

2. Click the Move button

1. Image Added

2. Select the new virtual appliance

Restrict a scaling group

To move a scaling group to a restricted virtual appliance, do these steps:

1. Click the cog or wrench maintenance symbol to put the scaling group into maintenance mode

2. Click the cross arrows move button

3. Select the checkbox to Move to a restricted virtual appliance, or 
   Select a restricted virtual appliance, or 
   Create a new VApp and select the Restrict virtual appliance checkbox

Delete a scaling group

When you delete a scaling group, the platform will place all the VMs in the virtual appliance as regular VMs and the scaling group constraints will no longer exist. 

To delete a scaling group:

1. Go to Virtual datacenters → Virtual appliances

2. Open the scaling group

3. Click the wrench maintenance button to put the scaling group into maintenance mode

4. Click the trash can delete button

Manage scaling groups with the API