| Table of Contents |
|---|
...
Public Networks allow the users of virtual datacenters to use Internet addressable public IP addresses in their virtual infrastructure. Users purchase or reserve public IPs for their enterprises in Virtual datacenters view. Public networks are not assigned to any specific enterprise in Abiquo and they cannot be set as the default network for an enterprise. They can be set as the default network for a virtual datacenter, but make sure that you have made enough public IP addresses available to the users and that the users have reserved enough public IP addresses for their VMs.
...
Display public networks
To display public networks:
...
To sort by a column, click in the header of the column.
To filter the results by any field, use the Search button.
To navigate through the pages, use the page scroll
...
Create public networks
Before you begin:
Obtain the network details from your Network Administrator
For NSX-T obtain the provider ID, which is the network path
For other systems, obtain the network address, network mask and tag, gateway, and so on
...
Select the Define checkbox.
Enter the details of the static route.
For example, to add a static route to the network/netmask 1.1.1.0/24 via the gateway/next hop 10.10.100.1
Enter the destination Netmask, e.g. 255.255.255.0 (the above screenshot may differ)
Enter the destination Network ID, e.g. 1.1.1.0
Enter the Gateway IP, which is the next hop on your network, e.g. 10.10.100.1
Click Save and the platform will add the static routes to the VM network configuration.
...
To set a network as the default, you will require privileges to access this network in the virtual infrastructure.
| Panel |
|---|
Privileges: Manage virtual datacenter network elements, Access public network tab, Manage public network elements, Access external network tab, Manage external network elements |
...
| Expand | ||
|---|---|---|
| ||
  |
...
Pages related to public networks
...