- only ip v4 considered (ABICLOUDPREMIUM-14014)
...
To configure Windows VMs with a static IP address and add a NIC:
- You can only use IPv4
- There cannot be a no DHCP remote service and no NSX device
- You must set 'com.abiquo.esxi.experimental.customize.win.unattendfile=false'"
- no dnsSufix configured at IP level, its only defined globally in the unattend file. Its the host fqdn without the hostname part.
- when not
When you are not using an unattend.xml file, there are
...
the following limitations:
- netBios is always disabled
- no dns domain at vnic level only gloabaly, but dns servers for each vnicDNS domain is only set globally, not at vNIC level, but DNS servers are set for each vNIC, not globaly
- no No OOBE specific configuration (in unattend.xml by default it sets SkipMachineOOBE / HideEULAPage / SkipUserOOBE / ProtectYourPC)
- no No autologon - when no password specified then always autologon
- timezone Time zone is another a system property.
- always Always join working group WORKGROUP (same as default in unattend) - no user/pass - no joindomain
- no No LicenseFilePrintData
- no No initial commands executed
- no windows No Windows key (setting user name and org name but no effect without key)when removing nics (win or linux) the customization is not applied, so virtualNic removed but the bindings still present (OS should handle this)