The platform enables you to create site-to-site VPNs between virtual datacenters and other virtual datacenters or other entities.
This feature is available in datacenters using VMware with NSX-NAT or NSX-gateway. In the platform, VPNs can connect to virtual datacenters in private cloud or virtual datacenters in AWS.
To work with VPNs, go to Virtual datacenters → select a Virtual datacenter → Network → VPN
Initial support for VPNs requires you to create a VPN site for each connected virtual datacenter. Both sites of a VPN must have the same encryption and authentication settings, and inverse local and remote network configurations.
The following table describes VPN functionality in the providers.
...
It may be helpful to complete this table to record your network values before you create your VPN:
...
NAT IP
...
For example:
...
NAT IP
...
- 192.168.0.0/24
...
- 192.168.200.0/24
...
To create the first VPN site:
- Go to Virtual datacenters → select a Virtual datacenter → Network → VPN
- Click the + Add button and enter the VPN details
The platform will create the VPN site.
| Include Page | ||||
|---|---|---|---|---|
|
To create the other VPN site in another VDC:
- Select the Virtual datacenter
- Add another VPN site using the remote network configuration of the first VPN site as the local values.
So in this example, the local network endpoint for the second VPN site would be 10.200.100.23 and the local network would be 192.168.200.0/24. The remote endpoint would be 10.200.100.8 and the remote network would be 192.168.0.0/24.
| Expand |
|---|
...
|
...