| Table of Contents | ||
|---|---|---|
|
...
Display NAT rules
When the Network Address Translation (NAT) integration is available in your environment, the NAT tab will display the NAT IPs and NAT rules for your virtual datacenter. NAT IPs can be associated with private IPs attached to VMs using NAT rules. They can also be used datacenters. From here you can manage NAT IPs and within the VM you can manage NAT rules.
Create a virtual datacenter with NAT
To create a virtual datacenter with NAT, create a virtual datacenter as usual, and the platform will automatically add a NAT IP and create an SNAT rule for all outgoing traffic. Then you can also create DNAT rules to associate a private IP attached to VM with a NAT IP, and an additional SNAT rule for that NAT IP.
Use a NAT IP for a load balancer
And you can use a NAT IP as a public IP address for load balancers, and the platform will automatically create a NAT rule to match the load balancer routing rule port mappings.
Obtain
...
an additional NAT IP
In addition to the NAT IP assigned to the virtual datacenter, you can obtain NAT IPs for creating additional NAT rules.
To obtain a NAT IP
- Click the + Add button on the top right-hand side of the screen
- Select the NAT network and click Accept
...
After you obtain a NAT IP, you can create a destination NAT rule for a private IP address on a VM.
...