Versions Compared

Version Old Version 11 New Version 12
Changes made by

Former user (Deleted)

Former user (Deleted)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

NameDescription
abiquo.nsx.transport-zoneThe transport zone where the networks created by Abiquo will be attached.
abiquo.nsx.edge.cluster-idIdentifier (in VCenter) of the cluster where Abiquo will deploy the ESG.
abiquo.nsx.edge.datastore-idCSV list of identifiers (in VCenter) of the datastores where Abiquo can deploy the ESG appliances according to the datastore-policy
abiquo.nsx.edge.datastore-policy

Allocation policy for selection of datastores to deploy ESG appliances.
Default: leastvms
Range: leastvms, mostspace

abiquo.nsx.edge.dvportgroup-id

Id of the port group where Abiquo will attach the ESG uplink.
abiquo.nsx.edge.public-network-cidr Network range where the ESG uplink IP and the "public" load balancer IPs will be taken from. It must be a range dedicated to Abiquo.
abiquo.nsx.load-balancer-reserved-ips

Number of IP addresses that are reserved for NSX in each private network to allocate to load balancers. Default: 20
The gateway can be address 1. The reserved IPs range starts from address 2 for the number of IPs configured by the user, by default, up to address 21
Users should work with automatic IP allocation. In any case, the system administrator should inform the users of the range and by default, the first free address is address 22 

The following properties can be configured globally or per tenant. See Manage tenant properties to configure them as tenant properties.

To configure properties globally in the DC Remote Server properties, use them with an abiquo. prefix:

NameDescription

nsx.virtualwire.teaming  

Set

Use this property to set the teaming policy for the portGroup that is the backing for the VirtualWire when it is created.

(minus) 

This value

is required and you cannot change it after creation. It can be set as an enterprise property without the abiquo prefix.
Suggested default

cannot be changed after it is created.
Default: "failover_explicit"
Values: "failover_explicit", "loadbalance_ip", "loadbalance_loadbased", "loadbalance_srcid", or "loadbalance_srcmac"

abiquo.

nsx.edge.esg.size

Size of the ESG appliances.

Values: compact, large, quadlarge, xlarge

nsx.edge.descriptionDescription to configure in the edges created by Abiquo.