Page Comparison

To create a rack:

1. Open the Infrastructure view and select Private and the datacenter name. If you are not in the Infrastructure details tab (with Servers, Network, etc.), open it by clicking the server button in the top right corner of the screen.
2. At the top of the DATACENTERS list, click the plus button 
3. Enter information for "Rack" 
   Image Modified
   
   
4. Click Network and enter details for your switch and environment. The platform will use these settings to create a pool of VLAN tags to assign to private networks
   Image Modified
5. Click "Save"

To create datastore tiers

1. In the Infrastructure view, click the Datastore tiers tab, and click + Add to create a datastore tier.
   Image Modified
2. On the Enterprise access tab, allow all enterprises to access the tier.

Task: Add a physical machine

1. Use the + button to create a new physical machine. For example, for vCenter.
   Image Modified
   Select the hosts to add to Abiquo and configure them as described here.
   
   1. For each hypervisor host, you must enable a network interface (by assigning a Network Service Type). This is the network interface that is listening on VLANs.
      Image Modified
   2. For each hypervisor host, you must enable at least one datastore (mark the checkbox).  Do not enable the vm_repository for use as a datastore.
      Image Modified

Repeat the process of adding the physical machine for additional hypervisor hosts. Add the datastores to a datastore tier.

To create a public network and IPs

1. From the Infrastructure side, select Datacenter, Network tab, and select the "Public" sub-tab.
2. Click the + icon to add a VLAN
3. Fill in the necessary information and click Save
   Image Modified
4. Create IPs as required. Click Accept Image Removed
5. Review the list of available IPs and make unavailable any IPs that are required for administration purposes
   Image Removed. Use the arrow button to move one or more IPs from available to unavailable
6. If a specific Public IP might have been misused, it can be quarantined. A quarantined IP cannot be used by any enterprise to provision to their VMs. Mark the "Quarantine" checkbox Click the quarantine button to make an IP unavailable to enterprises in the 'PUBLIC IPS' table.

To create allocation rules

1. Select the Data Center and edit. Select the Allocation Rules tab
   Image Modified
2. Add a new 'DATACENTER' rule on the right pane with the + icon. Select the Rule type such as 'Compute load level' as below. This rule can be used for oversubscription of CPU. For example, in a test system with small VM templates, you could set RAM to 100% and CPU to 400%. You can also set a storage load level rule for datastore usage.
   Image Added
   If you are adding a vCenter cluster directly as a physical machine, use the server rule not the cluster rule.
   Image Modified

To add credentials for the current enterprise:

1. In the top right-hand corner of the screen, click on the user icon.
2. From the dropdown menu, select Edit credentials
   Image Modified
3. Select the cloud provider
4. Enter the Access key ID and the Secret access key
5. Click Add account
   Image Modified
6. Click Close

The credentials will be added to the tenant's account