...
| Name | Description |
|---|---|
| nsx.gateway.network-id | VLAN tag of the tenant network where the ESGs will be connected. Abiquo will create a distributed port group if none exists for that VLAN |
| nsx.gateway.network | Network CIDR of the tenant network |
| nsx.gateway.datacenter | The Datacenter where Abiquo will create the distributed port group for the tenant VLAN, if missing |
nsx.gateway.dvs | The distributed virtual switch where Abiquo will create the distributed port group for the tenant VLAN, if missing |
| Identifier of the AS used in the tenant network | |
nsx.gateway.bgp.from-edge-password | BGP password for gateway from Edge |
| nsx.edge.uplink.ips | Comma separated list of the IP addresses to assign to the uplink interfaces of the ESGs. The number of IP addresses here will determine the number of ESGs Abiquo will deploy when creating a Virtual datacenter |
| nsx.edge.bgp.peers | Comma separated list of the IP addresses to be configured as BGP neighbor of each ESG uplink |
| nsx.edge.bgp.as | Identifier of the AS used by the ESGs |
nsx.edge.bgp.from-local-password | BGP password from local |
| nsx.edge.bgp.hold-down-timer | Hold down timer value for the BGP between the ESGs and the tenant network |
| nsx.edge.bgp.keep-alive-timer | Keep alive timer or for the BGP between the ESGs and the tenant network |
| nsx.edge.bgp.weight | Weight of each neighbor in the BGP between the ESGs and the tenant network |
| nsx.local.bgp.as | Identifier of the AS used by the local DLR |
| nsx.local.bgp.hold-down-timer | Hold down timer value for the BGP between the DLR and the ESGs |
| nsx.local.bgp.keep-alive-timer | Keep alive timer for the BGP between the DLR and the ESGs |
| nsx.local.bgp.weight | Weight of each neighbor in the BGP between the DLR and the ESGs |
nsx.transit.network | Network CIDR of the transit network |
nsx.virtualwire.teaming | Use this property to set the teaming policy for the portGroup that is the backing for the VirtualWire when it is created. This value cannot be changed after it is created. |
abiquo.nsx.edge.esg.size | Size of the ESG appliances. Values: compact, large, quadlarge, xlarge |
| abiquo.nsx.edge.dhcp.size | Size of the ESG appliance to use when creating the DHCP Edge for the virtual datacenter. Values: compact, large, quadlarge, xlarge |
| nsx.edge.description | Description to configure in the edges created by Abiquo. |
...